• Announcements

    • iacas

      Introducing TST "Clubs!"   08/28/2017

      No, we're not getting into the equipment business, but we do have "clubs" here on TST now. Groups. Check them out here:
Sign in to follow this  
The Wolf

Patrick57's “Liar, Liar” Thread

Recommended Posts

I know I'm new to this board but I would like to start a thread based on the above Jim Carey film where he has to tell the truth, IOW he can't lie. I have only had contact with a few people but I am going to throw the cat among the pigeons and say it as I see it.

Lihu A bit dense but pleasant enough.

Mvmac Knowledgeable (I think), can be touchy and always agrees with a guy called Erik.

MS256 Know it all with bullying tendencies (of course this is unfair but I want to ruffle a few feathers) but he can take criticism

Golfingdad Don't you all just love him

iacas He definitely has some superiority here and he knows it

That's my stab at Liar, Liar. Who's brave enough to continue.

BTW I'm a really nice guy but when you are far enough away from me and aren't an immediate threat, I can be a little 'trolly'.

Share this post


Link to post
Share on other sites

Sign up (or log in) today! It's free (and you won't see this ad anymore)!

Sign up (or log in) today! It's free (and you won't see this ad anymore)!

Interesting move.  All internet forum boards have personalities; ours is pretty good aside from the occasional newb that takes things somewhat personally.  I'll posit that you can't judge us after two weeks and a handful of posts.  If you love golf, have a personality, and can laugh at things (including yourself) then you can't help but love this place.

Share this post


Link to post
Share on other sites
Awards, Achievements, and Accolades

Lihu dense????? Pretty sure he is one of the smarter guys around.


I'm just so glad I made "the list". :smartass:

Share this post


Link to post
Share on other sites
Awards, Achievements, and Accolades

Lihu dense????? Pretty sure he is one of the smarter guys around.

Seriously, the dude builds fricken' ROBOTS for crying out loud! :-D

Share this post


Link to post
Share on other sites
Awards, Achievements, and Accolades

Seriously, the dude builds fricken' ROBOTS for crying out loud! :-D

Maybe by "dense" the OP meant mass of myelin per CC of brain volume.

Share this post


Link to post
Share on other sites
Awards, Achievements, and Accolades

Great way to ease into any community......

@Patrick57 has been easing himself into and out of this community for years now.

Perhaps his boyfriend can talk some sense into him. Or was that a slip-up when you forgot whether you were pretending to be male or female this time around, Patrick?

Share this post


Link to post
Share on other sites
Awards, Achievements, and Accolades

@Patrick57 has been easing himself into and out of this community for years now.

Perhaps his boyfriend can talk some sense into him. Or was that a slip-up when you forgot whether you were pretending to be male or female this time around, Patrick?

Well now I'm disappointed.  After all this time, I'd expect that he would be getting more clever, but that's not the case.  He's just as tiresome and transparent as always before.

Ah well, maybe he's just getting old and tired.......

Share this post


Link to post
Share on other sites
Awards, Achievements, and Accolades

I get nothing?! [quote name="k-troop" url="/t/73483/patrick57s-liar-liar-thread#post_967517"] Maybe by "dense" the OP meant mass of myelin per CC of brain volume.[/quote] Don't let Sean Foley near him.

Share this post


Link to post
Share on other sites
Awards, Achievements, and Accolades

I get nothing?!

Don't let Sean Foley near him.

Jamo A man of few words, but what he says pierces the heart. I still can't believe he's that low.

Share this post


Link to post
Share on other sites

Look here everyone, he is looking for attention. If everybody here can ignore him, DO NOT REPLY OR EXCHANGE communication with this moron. Eventually he will go away again. Maybe for good.

So I'm doing my part, I will NEVER EVER EVER EVER replay to any of his posts from now on.

Share this post


Link to post
Share on other sites

DO NOT REPLY OR EXCHANGE communication with this moron.

Its nice to be nice! As this is the "Liar, Liar" thread, no offense taken.

Share this post


Link to post
Share on other sites

I didn't make the list..

I get nothing?!

If it makes you guys feel any better, I find you both to be very dense with quite the bullying tendencies :beer:

Agreed though on Mvmac being (I think) knowledgable ;-)

And Erik doesn't have a superiority complex. He's ripped on his own swing for years, even when he was a 1.0 index. If anything, the guy could use some of our encouragement!

(hehe) :-P

Share this post


Link to post
Share on other sites
Awards, Achievements, and Accolades

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

Sign in to follow this  



  • Want to join this community?

    We'd love to have you!

    Sign Up
  • 2017 TST Partners

    Talamore Golf Resort
    PING Golf
    FlightScope Mevo
    Mission Belt
    Snell Golf
    Frogger Golf
    PitchFix USA
  • Posts

    • I ordered a PING G400 LST Driver with a Tour 65 x stiff shaft back in August. I was told that it wouldn't even ship until October. I had hit the regular G400 head with the x-stiff Project X HZRDUS Yellow shaft at a demo day and liked it even though I had to adjust the loft as low as it could go (8°) and I still launched it too high with too much spin. I was told the SLT head along with the Tour 65 shaft would correct the issues so I took a leap of faith and ordered it. While I waited for my driver to arrive I have been playing the demo because I hit it really straight even though I lost some distance due to launch and spin. Fast forward to yesterday, my new G400 SLT driver arrives. I take it out to the range and the course to play a few holes. What a difference! Club designers must be geniuses. Now with the loft set at 8.5° I launch the ball on a great angle and it goes and goes without falling out of the air. I haven't hit it on the monitor yet but I can tell the spin rates are much better. I hit the new driver and the demo to side by side and the SLT goes a good 15-20 yards farther. I just find it amazing what they are able to do with these driver heads by just moving a little weight around here and there. It's also a huge reason to get fitting if you want to play your best.
    • That new chart is wacked.  I have the original on my PC at home. Arturo has it the way I understood it... " the dot refers only to the head in relation to the factory standard lie angle which is black" I was measured on my wrist to floor and that gave them the starting point of Black +1". I then hit some balls off the lie board with tape and that showed I needed to be a lil upright so they gave me Blue dot, standard length shafts but it still off a bit.  Grabbed Blue dot, +1" and I was hitting the ball and board good so that was what I went with.  Any of my other clubs I have gone with 1* upright and +1" on shaft length.   ***** Just found this so I thought I would add it to the post ***** " a well-known standard in golf is that each 1/2" added to the shaft length = a 1* more UPRIGHT lie angle" Don't know if it is 100% but wanted to share as it might help OP with his dilemma.
    • Guess I'm not going to win this argument, so can't see the rules changing anytime soon. Hopefully the new 3 minute searching rule and maximum score on a hole will speed things up, as I guess that's one of the main reasons for changing them? Agree that ideally, we should have the same rules as the pros, but they do have advantages when it comes to looking for balls, in the form of a travelling army of spectators and marshals. Anybody who has followed a wild hitting group round in the British Open will know what I mean.
    • There are, particularly with Ping, a rather large set of variables.  And a large number of part options.  PowerSpec irons, as I understand, are "hosel bent" to reduce the loft.  Probably a bad description of what is done on my part but it, apparently, utilizes the cavity indentation near the heal/hosel.    Imagine doubling the number of parts in a Ping demo area.  Actually.... that's probably what they should do if they are going to offer it.  Regardless, it's back to the fitter time I am afraid.   
    • My understanding is that the dot refers only to the head in relation to the factory standard lie angle which is black. For example, a green dot would be the head bent to be 2 degrees upright. However, if the club is longer or shorter than standard length it is up to you and your fitter to decide which color code you need now to attain the effective lie angle that you want.
  • Blog Entries

  • Today's Birthdays

    1. KingHack82
      KingHack82
      (35 years old)
    2. TobyC
      TobyC
      (50 years old)
  • Get Great Gear with Amazon