Jump to content
Check out the Spin Axis Podcast! ×
Note: This thread is 2735 days old. We appreciate that you found this thread instead of starting a new one, but if you plan to post here please make sure it's still relevant. If not, please start a new topic. Thank you!

Which iron would do get, PxG GEN1's untried or Mizuno's tested?  

13 members have voted

  1. 1. Which iron would do get, PxG GEN1's untried or Mizuno's tested?

    • Mizuno
      10
    • PxG
      2
    • To tough to decide.
      0
    • Either one.
      1


Recommended Posts

Posted

As previously stated in another thread I am looking at purchasing a CB/MB mixed Mizuno iron set which I demo'd. I recently found out about the veteran's discount for PxG's and now considering the GEN 1's. I know this is subjective but which way would you go and why?

"My ball is on top of a rock in the hazard, do I get some sort of relief?"

Awards, Achievements, and Accolades

  • Moderator
Posted

I'd go with Mizuno. I really like the MP18s and you've already been fit for a set, right?

I don't really like the way the screws look on the PXG irons.

  • Thumbs Up 1

Bill

“By three methods we may learn wisdom: First, by reflection, which is noblest; Second, by imitation, which is easiest; and third by experience, which is the bitterest.” - Confucius

My Swing Thread

Awards, Achievements, and Accolades

Posted
13 hours ago, billchao said:

I'd go with Mizuno. I really like the MP18s and you've already been fit for a set, right?

I don't really like the way the screws look on the PXG irons.

I agree on the screws but they are pretty nice in person. I did get fit but I am not sure about the fitting other than the shaft recommendation. 

 

"My ball is on top of a rock in the hazard, do I get some sort of relief?"

Awards, Achievements, and Accolades

Posted
18 minutes ago, Valleygolfer said:

I did get fit but I am not sure about the fitting other than the shaft recommendation. 

Why? Just curious. Best, -Marv

DRIVER: Cleveland 588 Altitude ( Matrix Radix Sv Graphite, A) IRONS: Mizuno JPX-800 HD Irons & 3,4,5 JPX Fli-Hi (Grafalloy Prolaunch Blue Graphite, R); WEDGES: (Carried as needed) Artisan Golf 46, 50, 53, 56 low bounce, 56 high bounce; PUTTER: Mizuno TP Mills 9

Awards, Achievements, and Accolades

Posted
14 hours ago, MarvChamp said:

Why? Just curious. Best, -Marv

Well, no lie board. Had the shaft speed device thet measured my speed so I am okay with the shaft. I have two degree flat clubs and he recommended one degree flat. I feel like I should be using possibly 3 degrees flat but I am fairly accurate with 2 already. I had previously used a lie board for my current irons but my swing is different now yet he didn't measure the last e. 20180714_165729.jpg

"My ball is on top of a rock in the hazard, do I get some sort of relief?"

Awards, Achievements, and Accolades

Posted

Hmm...Any way to go question the fitter? Best, -Marv

DRIVER: Cleveland 588 Altitude ( Matrix Radix Sv Graphite, A) IRONS: Mizuno JPX-800 HD Irons & 3,4,5 JPX Fli-Hi (Grafalloy Prolaunch Blue Graphite, R); WEDGES: (Carried as needed) Artisan Golf 46, 50, 53, 56 low bounce, 56 high bounce; PUTTER: Mizuno TP Mills 9

Awards, Achievements, and Accolades

Posted
3 minutes ago, MarvChamp said:

Hmm...Any way to go question the fitter? Best, -Marv

Not sure but I know a guy with a lie board and have the stickers so might do that. 

"My ball is on top of a rock in the hazard, do I get some sort of relief?"

Awards, Achievements, and Accolades

Posted

I they are the same price, It would be really hard not to go with the PXGs..   and this is coming from someone with a bag full of Mizunos.   And, I love my Mizunos.   

but, you should really hit the PXGs.   If they feel to you as good as they felt to me, I'm sure that will make up your mind.  

:tmade:  - SIM2 - Kuro Kage silver 60 shaft
:cobra:  - F9 3W, 15 degree - Fukijara Atmos white tour spec stiff flex shaft

:tmade: - M2 hybrid, 19 degree
:tmade: - GAPR 3 iron - 18degree
:mizuno: MP-H5 4-5 iron, MP-25 6-8 iron, MP-5 9-PW

Miura - 1957 series k-grind - 56 degree
:bettinardi: - 52 degree
:titleist: - Scotty Cameron Newport 2 - Putter

check out my swing here

Awards, Achievements, and Accolades

Posted
20 hours ago, golfjedi777 said:

Can't go wrong with Mizuno. If you like the buttery feel.

True...

 

2 hours ago, lastings said:

I they are the same price, It would be really hard not to go with the PXGs..   and this is coming from someone with a bag full of Mizunos.   And, I love my Mizunos.   

but, you should really hit the PXGs.   If they feel to you as good as they felt to me, I'm sure that will make up your mind.  

I really would like to hit them, price is $25 more a club. I will see if they are carried at the golf shop in Portland this weekend.

  • Thumbs Up 1

"My ball is on top of a rock in the hazard, do I get some sort of relief?"

Awards, Achievements, and Accolades

Posted

I'd go with the Mizunos if you cannot get fit for the PXGs. I bought new irons three years ago and really wanted to get the new Hogans, but I couldn't find a fitter that offered Hogan. As you can see by my forum name I've played Hogans for decades. My son is actually playing my old set of Apex Edge Pros and I still have my Apex blades from the 90s. However,  getting fit by a certified fitter is very important. I love my Mizunos now and think they're just as good as the Hogans. I haven't paid much attention to PXG. Are they not offered by most club fitters?


Posted
2 hours ago, Hoganman1 said:

I'd go with the Mizunos if you cannot get fit for the PXGs. I bought new irons three years ago and really wanted to get the new Hogans, but I couldn't find a fitter that offered Hogan. As you can see by my forum name I've played Hogans for decades. My son is actually playing my old set of Apex Edge Pros and I still have my Apex blades from the 90s. However,  getting fit by a certified fitter is very important. I love my Mizunos now and think they're just as good as the Hogans. I haven't paid much attention to PXG. Are they not offered by most club fitters?

I know there are fitters around, just not sure if there is one up here in the boonies. I'm going to check a place this Saturday that shows on their website that they are a seller. 

"My ball is on top of a rock in the hazard, do I get some sort of relief?"

Awards, Achievements, and Accolades

  • Moderator
Posted

Ken Collins is in Manchester and was excellent. I did irons, Woods and putter with him a few years back. But he doesn’t do PXG.

http://www.kustomclubs.com/

 

Scott

Titleist, Edel, Scotty Cameron Putter, Snell - AimPoint - Evolvr - MirrorVision

My Swing Thread

boogielicious - Adjective describing the perfect surf wave

Awards, Achievements, and Accolades

Note: This thread is 2735 days old. We appreciate that you found this thread instead of starting a new one, but if you plan to post here please make sure it's still relevant. If not, please start a new topic. Thank you!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


×
×
  • Create New...

Important Information

Welcome to TST! Signing up is free, and you'll see fewer ads and can talk with fellow golf enthusiasts! By using TST, you agree to our Terms of Use, our Privacy Policy, and our Guidelines.