Jump to content
Subscribe to the Spin Axis Podcast! ×
Note: This thread is 5573 days old. We appreciate that you found this thread instead of starting a new one, but if you plan to post here please make sure it's still relevant. If not, please start a new topic. Thank you!

Recommended Posts

i am looking for a godd fairway wood with a small head the best part of my game is my hybrids but the worst is my fairway woods not off the tee. i have looked at the cleveland hi-bore xls and the taylormade burner high launch. but then today i found the adams a40s and wilson fybrid
DriverMonster Hi-Bore XLS/w Mintsubishi Diamana Fit-On M Gold Stiff 55g
Woods906F4 3 Wood/w Aldila VS Proto Fairway Stiff 80g
Hybrid3dx red 20 and 23 degree
Irons3dx red 5-pw
Wedgesharmonized sand wedge 56 degree loft and harmonize lob wedge 60 degree loftPutterWhite Hot XG SabertoothBallNoddle or ...

I always wanted to try the Adams you mentioned when I was in the market... but I ended up e-baying the Sonartec in my sig, and it is the sweetest 3-wood I have had the pleasure of playing. It is a deadly straight club for finding the fairway and the head is on the smaller side. Not sure if they are still available, but most likely you can find one someplace if you look around.

Also, Callaway Pre-owned probably has some of those immensely popular Steelheads that many people still play today... they were a classic and are still one of the best in my opinion.
My Clubs: Callaway FT-i Tour LCG 9.5° w/ Matrix Ozik Xcon 6 stiff; Sonartec GS Tour 14° w/ Graphite Design Red Ice 70 stiff; Adams Idea Pro 2h(18°) & 3h(20°) w/ Aldila VS Proto 80 stiff; Adams Idea Pro Forged 4-PW w/ TT Black Gold stiff; Cleveland CG12 DSG RTG 52°-10° & 58°-10°; Odyssey...

Give the Titleist 909F3 a try. I've found it to be a great 3-wood off the tee.

Yonex Ezone Type 380 | Tour Edge Exotics CB Pro | Miura 1957 Irons | Yururi Wedges | Scotty Cameron Super Rat | TaylorMade Penta


Since I like Mizuno drivers I looked for a recent 3, and 5 wood design with a shaft I'm familiar with. I found some Mizuno F-60 fairway woods on eBay with the UST ProForce V2 shafts. I bid and won them and I am happy playing them. My suggestion would be try the demo bin at Golfsmith or Edwin Watts or a large store near you. Then look on eBay for the clubhead you like with a shaft you are familiar with. That is a cost effective way to get what you need. IMHO

It ain't bragging if you can do it.
 
Taylor Made Burner '09 8.5* UST Pro Force V2, Mizuno F-60 3 wood UST Pro Force V2, Mizuno MP-68 3-PW  S300, Bobby Jones Wedges S and L, Nike Ignite 001, Leupold GX-II


Since I like Mizuno drivers I looked for a recent 3, and 5 wood design with a shaft I'm familiar with. I found some Mizuno F-50 fairway woods on eBay with the UST ProForce V2 shafts. I bid and won them and I am happy playing them. My suggestion would be try the demo bin at Golfsmith or Edwin Watts or a large store near you. Then look on eBay for the clubhead you like with a shaft you are familiar with. That is a cost effective way to get what you need. IMHO

the trouble with that is i am left handed

DriverMonster Hi-Bore XLS/w Mintsubishi Diamana Fit-On M Gold Stiff 55g
Woods906F4 3 Wood/w Aldila VS Proto Fairway Stiff 80g
Hybrid3dx red 20 and 23 degree
Irons3dx red 5-pw
Wedgesharmonized sand wedge 56 degree loft and harmonize lob wedge 60 degree loftPutterWhite Hot XG SabertoothBallNoddle or ...

you can still find them brand new on eBay sometimes, the Sonartec GS Tours. excellent fw woods with small heads. also, the Mizuno F-60 fw woods have small, traditional shape heads


  aca247 said:
the trouble with that is i am left handed

This is your lucky day then.

http://golfsupply.com/pages/PROMOTIO...onLeftHand.htm The Ashton X1 is just what you're looking for and the price is RIGHT!

:tmade: R15 14* Matrix Black Tie 7m3

:adams: Speedline Super S 3w & 5w Matrix Radix HD S VI

:callaway: X-12 4-PW Memphis 10

IONNOVEX  Type S GDT 50*, 54* & 62* Mitsubishi Rayon Kuro Kage Black 80ir

:odyssey: Tri-Ball SRT

-Landon


Too bad you are left handed, I have a Mizuno F-50 15* 3 wood and 18* 5 wood for sale...With the Mizuno Exsar FS2 Stiff Shaft..

9.5º TaylorMade R9 TP VooDoo XNV6 | TaylorMade R9 TP 13º 3W & 19º 5W Both with Fujikura Motore F1 85 | Mizuno MP-57 DG X-100 (3-PW) | Titleist Vokey 52º, 56º, 60º | 34'' Scotty Cameron Studio Select Newport 2 | The Cardinal Club [73.9/135]


  aca247 said:
the trouble with that is i am left handed

Well that means you may find the heads you want and then get the shafts you want fitted later. Heck, you can buy the shafts you want on eBay. They aren't left or right handed. You still want to find the heads at the lowest prices possible. eBay allows you to bid and win the items you want at prices you can afford. That is it's beauty, but I will allow left handed clubs and heads aren't the most plentiful. Good Luck.

It ain't bragging if you can do it.
 
Taylor Made Burner '09 8.5* UST Pro Force V2, Mizuno F-60 3 wood UST Pro Force V2, Mizuno MP-68 3-PW  S300, Bobby Jones Wedges S and L, Nike Ignite 001, Leupold GX-II


I can rep for the Taylormade high launch burners. Very easy to hit off of the deck. I just picked up some Titleist 906F2's but I can't try them out till Christmas. I noticed a majority of the Titleist tour players were still playing this wood, even though the 909F series have been out for a while, figured there must be something good about them.
-Kevin
In the Nike Pro Tour Combo Bag:
907 D2 9.5*
906F2 18* 5W
585H 21* 3 Hybrid 735.CM 4-PW 51.06 MP-T & 56.13 MP-T White Hot #1

Check out the Adams BUL and BTY also.

:tmade: R15 14* Matrix Black Tie 7m3

:adams: Speedline Super S 3w & 5w Matrix Radix HD S VI

:callaway: X-12 4-PW Memphis 10

IONNOVEX  Type S GDT 50*, 54* & 62* Mitsubishi Rayon Kuro Kage Black 80ir

:odyssey: Tri-Ball SRT

-Landon


I just reshafted my old Cleveland Launcher with a V2 shaft and it made a big difference. Alot straighter and more length while still maintaining the look and feel of the smaller head.
In my Vantage bag:
Driver::905R 8.5*(V2)
3 Wood:Launcher 13*(V2)
Irons:AP2 (Project X 5.5) (3-W)
HybridTWS 19*Gap wedge:CG15 50* Sand wedge:CG15 56*Putter:: XG9 (35")Ball:ProV1X

Too bad Sonartec went out of business. They had some great looking clubs. A lot of people (myself included) are afraid to venture away from the big names and that is probably why they went under. I had a buddy who relied on his Sonartec 3-wood pretty much on every tee shot and hit the thing like 270. I used to laugh at the thing but then I tried it and it was real solid. The Titleist fairway woods still have small heads. I have a 980F from a few years back and I have seen the newer F3 and the head looks pretty small too.

"I'm not going left or right of those trees, okay. I'm going over those trees...with a little draw." ~ Tin Cup


I think you can still find some new taylor made retro series like this one



head is really small and feel at impact really fantastic.
the only problem is that they are only available in 13° or 16° raylor


The Titleist 909F2 fairways have really impressed me.
909D Comp 9.5* (house MATRIX OZIK XCON-6)
Burner Superfast 3 & 5 woods (house MATRIX OZIK XCON-4.8)
G15 Hybrid 23* (AWT shaft)
G5 5 iron-PW-46*, UW-50*, SW-54 & LW-58 (AWT shaft)
Studio Select Newport 2 Mid SlantGrips: PING cords & Golf Pride New Decade Multi-Coumpound Bag: C-130...

Give the Nike DyMo a go. Pretty small head and an open face for workability, PLUS... there dropping in price cuz the new clubs are coming out soon.

Driver:Taylormade Burner 10.5 with Aldila NV 65S
FW Wood: Nike Dymo 3 Wood with Aldila VooDoo
Hybrids: Adams Idea A7 3 Hybrid
Irons: Ping i15 4-P
Wedge: Cleveland CG15 52.10 and Titleist Vokey 58.12Putter: Bettinardi BC3Ball: Callaway Tour i(z) and Titleist Pro V1x


Give the Nike DyMo a go. Pretty small head and an open face for workability, PLUS... there dropping in price cuz the new clubs are coming out soon.

For real? Something new already???? Seems like the Dymo just arrived.

909D Comp 9.5* (house MATRIX OZIK XCON-6)
Burner Superfast 3 & 5 woods (house MATRIX OZIK XCON-4.8)
G15 Hybrid 23* (AWT shaft)
G5 5 iron-PW-46*, UW-50*, SW-54 & LW-58 (AWT shaft)
Studio Select Newport 2 Mid SlantGrips: PING cords & Golf Pride New Decade Multi-Coumpound Bag: C-130...

Give the Nike DyMo a go. Pretty small head and an open face for workability, PLUS... there dropping in price cuz the new clubs are coming out soon.

I have to second this vote. The Nike DyMo fairway woods are exceptionally easy to hit and feel great. And with the current pricetag of $100 or less you cannot go wrong

What's in my TaylorMade stand bag:
taylormade.gifSuperfast TP 10.5° Matrix HD6 graphite stiff shaft
nike.gifSasQuatch 2 Steel #3 Wood: 15° Diamana SasQuatch Graphite
cobra.gifBaffler DWS Hybrid Utility Woods: 3/R 20°
cobra.gifS2 Forged irons 4-PW stiff flex steel shaftcleveland.gifCG15 satin chrome 48° gap wedge 8 bouncemizuno.gifMP T Series chrome 53° sand...cleveland.gifnike.gifbridgestone.giftaylormade.gif


Note: This thread is 5573 days old. We appreciate that you found this thread instead of starting a new one, but if you plan to post here please make sure it's still relevant. If not, please start a new topic. Thank you!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


×
×
  • Create New...

Important Information

Welcome to TST! Signing up is free, and you'll see fewer ads and can talk with fellow golf enthusiasts! By using TST, you agree to our Terms of Use, our Privacy Policy, and our Guidelines.

The popup will be closed in 10 seconds...