Jump to content
Check out the Spin Axis Podcast! ×
Note: This thread is 5733 days old. We appreciate that you found this thread instead of starting a new one, but if you plan to post here please make sure it's still relevant. If not, please start a new topic. Thank you!

Recommended Posts

Posted
Will I notice a significant difference in ball flight going from a 10.5 to 9.5 loft in my driver?

Any other differences to expect?

Thanks!

John

PING K15 Driver
Tour Edge 4 Wood
PING K15 7 Wood
PING i15 Hybrid
PING Zing-2 Irons


Posted
It will fly slightly lower I guess. What is the reason you want to change from 10.5 to 9.5?

Ogio Grom | Callaway X Hot Pro | Callaway X-Utility 3i | Mizuno MX-700 23º | Titleist Vokey SM 52.08, 58.12 | Mizuno MX-700 15º | Titleist 910 D2 9,5º | Scotty Cameron Newport 2 | Titleist Pro V1x and Taylormade Penta | Leupold GX-1

Awards, Achievements, and Accolades

Posted
It will fly slightly lower I guess. What is the reason you want to change from 10.5 to 9.5?

Should be a bit less spin also I believe.

In my bag:

Driver: Titleist TSi3 | 15º 3-Wood: Ping G410 | 17º 2-Hybrid: Ping G410 | 19º 3-Iron: TaylorMade GAPR Lo |4-PW Irons: Nike VR Pro Combo | 54º SW, 60º LW: Titleist Vokey SM8 | Putter: Odyssey Toulon Las Vegas H7

Awards, Achievements, and Accolades

Posted
See if it helps my control. I tend to get a high ball flight which sends the ball far right when my slice kicks in. Im wondering if the lower ball flight might help a bit. Any thoughts?

PING K15 Driver
Tour Edge 4 Wood
PING K15 7 Wood
PING i15 Hybrid
PING Zing-2 Irons


Posted
will a lower ball flight help your slice? Not at all.

a 9.5* will help keep the ball juist a bit low and as jamo stated, keep it a bit less backspin. As for your slice, a driver isn't ging to fix or help that. Its your swing.

DST Tour 9.5 Diamana Whiteboard
909F3 15* 3 FW stock Aldila Voodoo
909F3 18* 5 FW stock Aldila Voodoo
'09 X-Forged 3-PW Project-X 6.0 Flighted
CG15 56* X-Tour 60* Abaco


Posted
As a general rule, the less loft the more pronounced side spin. As a result, your slice will tend to increase with the less lofted club. You might find increasing loft on the driver or even using a 3 wood off the tee to be a better solution in your case. Even the best pros will pull it out when the big stick is acting up.

In David's bag....

Driver: Titleist 910 D-3;  9.5* Diamana Kai'li
3-Wood: Titleist 910F;  15* Diamana Kai'li
Hybrids: Titleist 910H 19* and 21* Diamana Kai'li
Irons: Titleist 695cb 5-Pw

Wedges: Scratch 51-11 TNC grind, Vokey SM-5's;  56-14 F grind and 60-11 K grind
Putter: Scotty Cameron Kombi S
Ball: ProV1

Awards, Achievements, and Accolades

Posted
Thanks for the advice fellas. I'm glad I asked before switching out. I really just need to work on my darn swing!

PING K15 Driver
Tour Edge 4 Wood
PING K15 7 Wood
PING i15 Hybrid
PING Zing-2 Irons


Posted
Yep. The high ball flight is not because of the driver, but your swing. Trying to mask it by hitting a lower lofted driver will not make you a better golfer.

Ogio Grom | Callaway X Hot Pro | Callaway X-Utility 3i | Mizuno MX-700 23º | Titleist Vokey SM 52.08, 58.12 | Mizuno MX-700 15º | Titleist 910 D2 9,5º | Scotty Cameron Newport 2 | Titleist Pro V1x and Taylormade Penta | Leupold GX-1

Awards, Achievements, and Accolades

Posted
I switched from 10.5 to 9.5 earlier this year; lower ball flight, and a little longer. I'm finally getting to downslopes on two of the holes on my home course, which is nice, because the rollout on those holes makes me feel even longer.

I'd say I picked up 15 yards in distance from this change, and it cost me about one fairway per round. I'd love to make the trade a second time if it were feasible (but I don't think I'd get that from an 8.5).

-- Michael | My swing! 

"You think you're Jim Furyk. That's why your phone is never charged." - message from my mother

Driver:  Titleist 915D2.  4-wood:  Titleist 917F2.  Titleist TS2 19 degree hybrid.  Tour Edge Exotics C723 21 degree hybrid.  Irons 5-U, Ping G400.  Wedges negotiable (currently 54 degree Cleveland, 58 degree Titleist) Edel putter. 

Awards, Achievements, and Accolades

Posted
Dammit. I wanted to trade this guy my 9.5* for his 10.5* so i can get a little less spin and less slice. Why you guys gotta be so honest? I would go from 10.5 to 9.5 if I was a 16 index too. but im not. 20 and climbing lately. Ugh. Cant wait for my lesson

"My greatest fear is that when I die my wife will sell my golf clubs for what I told her I paid for them."
What's in my SQ Tour Carry bag?:
Driver: R7 Quad 9.5*
3, 5 Wood: G5 clones
Irons: : AP1 (4-PW) Wedges: 52*, 56*, 62* Spin Milled Putter: White Hot 2 Ball BladeBalls: Shoes: My...

Awards, Achievements, and Accolades

Posted
Sorry bud. I tried that last season when I started slicing off the tee. No driver will help. It took me one half hour session with the pro to identify why I was slicing and it fixed my problem. Slicing is (typically) one of the easiest corrections to make with a little time and money for a lesson.

What I Play:

Driver: R9 460
4 Wood: G15

Hy: Callaway FT 3Hy

Irons: AP1 4-PW

Wedges: Vokey 52* & 60*, Mizuno MP-T 10 58*

Putter: Newport Studio Select 2.7

Ball: Nike One Vapor


Posted
Should be a bit less spin also I believe.

i think for a player looking for a lower ballflight, this will not be the case..... or better said : I think the ball flight might become that low that the player will come in steeper at the ball to get a decent height and the spin might well increase ..... instead of the expected decrease.

Best way to lower the spin rate is hitting the ball on the upswing !

Cal Razr Hawk 10.5 | TM Superfast 3W | Adams Idea Pro Black 20 | MP-68 3-PW | TW9 50/06 + 58/12 | Ram Zebra Putter


Posted
As a general rule, the less loft the more pronounced side spin. As a result, your slice will tend to increase with the less lofted club.

Yup. I know this to be true, at least for me. Kinda like the 3 iron compared to the 6 iron. Less loft, more pronouced hooks and slices.

Titleist Bias - 907D2 9.5 V2 Stiff | 906F2 15 V2 Stiff | 710MB 3-PW DG300 | 52, 56 SM Vokes | Tom Slighter - 2007 Tacoma FPR


Note: This thread is 5733 days old. We appreciate that you found this thread instead of starting a new one, but if you plan to post here please make sure it's still relevant. If not, please start a new topic. Thank you!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Want to join this community?

    We'd love to have you!

    Sign Up
  • TST Partners

    Carl's Place
    PlayBetter
    Golfer's Journal
    ShotScope
    The Stack System
    FitForGolf
    FlightScope Mevo

    Coupon Codes (save 10-20%): "IACAS" for Mevo/Stack/FitForGolf, "IACASPLUS" for Mevo+/Pro Package, and "THESANDTRAP" for ShotScope. 15% off TourStriker (no code).
  • Posts

    • Hello Golfing Buddies, It has been awhile since I posted but I am the Retired Old Man that asked for advice because I suffered two "T.I.A.'s about switching from playing right handed to playing left handed.  I purchased a Callaway Edge Left handed golf clubs. I changed the grips to oversize grips.  Well, two weeks ago and still at 79 years old, I shot a 44 and 47 on a small course in my hometown.  I am currently changing my shafts from regular flex to Senior flex.  So, you can see' it can be done! So, you other old timers; get with the program! Blessings to all of you. Retired Old Man (Terry Warner)  
    • Haiduk - Archdevil        
    • Probably since the golfer has to swing the club back and up. The hands have to move back and up. You can feel them go back and up just by turning the shoulders and bending the right arm, because it brings your hands towards your right shoulder.  The difference is if you maintain width or not. Less width means a shorter feeling swing path so the more you need to lift the arms. Being as someone who gets the right arm bend at 110+ degrees, it's 100% a timing issue. I am use to like a 1.5+ second backswing. It probably should be like 1 second at most. Half a second or more will feel like an eternity. I have had swings where I keep my right arm straighter and I am still trying to time the downswing based on the old tempo.  Ideally, for me, it is probably going to be a much quicker and shorter (in duration) backswing, while keeping the right elbow straighter. Which also means more hinging to get swing length without over swinging. 
    • Wordle 1,789 5/6 ⬜⬜⬜⬜⬜ ⬜⬜🟨⬜⬜ ⬜🟩⬜🟩🟩 ⬜🟩🟨🟩🟩 🟩🟩🟩🟩🟩
    • I'm currently recuperating from surgery, so no golf, but have been thinking about this quite a bit. This and the don't overbend the right arm thing. It's hard for me to even pose the position, so I'm not 100% sure, but I feel like it's impossible to have the right humerus along the shirt seam and not overbend your right arm, unless your hands are down near your hips. If the left arm is up at or above the shoulder plane and your right arm is bent less than 90 degrees, then your right humerus has to raise or your hands will get pulled apart. Your left hand can't reach your right hand unless either the right upper arm is up or the right arm is overbent. Is that right? If it is, then focusing on not overbending the right arm would force you to raise the humerus. And actually thinking further on it, if you do overbend your right arm, then you're basically forcing your upper arm down or forcing your left arm to bend. Since (for me at least) bending the left arm too much is not something I think I need to worry about, it means that the bend in the trail arm is really the driving force behind what happens to the right humerus. 
×
×
  • Create New...

Important Information

Welcome to TST! Signing up is free, and you'll see fewer ads and can talk with fellow golf enthusiasts! By using TST, you agree to our Terms of Use, our Privacy Policy, and our Guidelines.