Jump to content
IGNORED

A better driver?


Note: This thread is 5142 days old. We appreciate that you found this thread instead of starting a new one, but if you plan to post here please make sure it's still relevant. If not, please start a new topic. Thank you!

Recommended Posts

Hey guys,
I have gone through two drivers and one, being my current, is adjustable. I had the 09 Burner, which didn't like too much at address plus the stock stiff shaft was just too unstable for my liking. Now I have the Dymo STR8 fit and it has been hit and miss. More than half of the time I am not liking the drives with it and its not just all between the ears. I can't seem to hit this driver nor the old Burner.. I think its time to go and get fit for a driver, I did with my irons and it did wonders, same with the wedges.

My choices are the following:
1. TM R9 - I like it because of the shape and its a bit smaller
2. Nike VR

Those are really the two I am looking at right now.. Please throw in some suggestions for some I might want to look into.

Thanks!

- VR Pro LTD - 9.5 Ahina X

- VR_S 3, 5 woods - Fubuki X

- VR Pro Combo - 3-Pw S300's
nike.gif - VR VRev Wedges - 52, 58 

- Method 001 - 34in.

- 20XI-S

- 20XI Staff Bag

 

Link to comment
Share on other sites


I think the iMix technology from Callaway is a little underrated. I love the FT-9 head and being able to switch it out with shafts is awesome, allowing me to hit it high or low. I think its getting pretty cheap now, so maybe check em out.

But of the two you have suggested, i prefer the R9. I never really liked Nike (idk.....), and the R9 looks soooo sweet at adress. Hope you pick a winner! Cheers..

Whats in my 14 Way Stand Bag?? Just...
taylormade.gif Superfast TP 8.5* Matrix HD6 Stiff
taylormade.gif '07 Burner 5 wood 18* Snr. 50g
titleist.gif 710 AP2 3-PW w/ Dy. Gold S300
taylormade.gif Z TP 52* 8* stock wedgeflexscratch.gif 8620 56* with D/S grindcallaway.gif 2009 Forged X-Tour 60* 10* bounce stock wedgeflexcameron.gif Pro Platinum Laguna 2.5, 32.5inches

Link to comment
Share on other sites


I guess you should go a for a fitting, that should give you some suggestions on what you should do. I would take that information and probably reshaft one of your current
drivers if possible. It isn't likely that the driver heads have anything wrong with them so the next thing to do after reshafting is get lesson help if you're still having a problem.

It ain't bragging if you can do it.
 
Taylor Made Burner '09 8.5* UST Pro Force V2, Mizuno F-60 3 wood UST Pro Force V2, Mizuno MP-68 3-PW  S300, Bobby Jones Wedges S and L, Nike Ignite 001, Leupold GX-II

Link to comment
Share on other sites


What is your current ball flight with the Nike Dymo? What do you not like about your drives with it? Suggestion wise there are so many out there that are great. Titleist 909D3, Ping G15, Callaway FT Tour, and Nike VR Tour are a few that really get great reviews out of the newer drivers. If you like the adjustability you may want to wait for the Titleist 910 series drivers. I think you can just pick out a driver head that you like and the most important part is the shaft that is in the club head.

I love my Adams 9015D which plays a slight fade and my 07 Burner TP which plays a slight draw. I've been gaming the Burner TP lately and its very consistent even though it's not as long as the Adams.

« Keith »

Link to comment
Share on other sites


you've tried two drivers, both of which weren't fitted for you with the proper shaft, and you're looking for suggestions on a "better" driver?
Both of the drivers you tried out are great drivers...a "better" driver would be one that you go and get fitted for the proper shaft. If that doesn't fix it, then its your swing.

to be more specific, what exactly do you mean by "hit or miss" with your Nike driver?
my suggestions:

- if you have a proper swing, go get fitted.
- if you have a crappy swing causing your drives to be hit or miss, then go get fitted anyway, then go fix your swing.

DST Tour 9.5 Diamana Whiteboard
909F3 15* 3 FW stock Aldila Voodoo
909F3 18* 5 FW stock Aldila Voodoo
'09 X-Forged 3-PW Project-X 6.0 Flighted
CG15 56* X-Tour 60* Abaco

Link to comment
Share on other sites


Most players with good swings can hit any driver well even though it isn't fit for them. The swing will make the driver better of course but having the optimum driver for your swing will get the best results. Don't just look in the equipment department since you did say you aren't always satisfied.

« Keith »

Link to comment
Share on other sites


i really prefer adjustable drivers now. The nike driver is a good driver but I dont know what they were thinking with the headshape. Its like inbetween a square and an oval, plus tiger woods cant hit it worth a crap
Link to comment
Share on other sites


I am checking out the following drivers myself:

1) Titleist 909 D2
2) Mizuno 630 Fast Track
3) Taylor Made Tour Burner TP

Titleist 910 D2 9.5 Driver
Titleist 910 F15 & 21 degree fairway wood
Titleist 910 hybrid 24 degree
Mizuno Mp33 5 - PW
52/1056/1160/5

"Yonex ADX Blade putter, odyssey two ball blade putter, both  33"

ProV-1

Link to comment
Share on other sites


I am checking out the following drivers myself:

#3 on that list is a club that I have been meaning to try. None of the people I know play it or do any of the shops carry one that is used.

« Keith »

Link to comment
Share on other sites


Nike VR tour is a nice driver, also the titelist d3 driver is really good.

Second thing is, it's not the driver it's you. Sorry but it's true.

Driver: 909D3 8.5* Diamana White Board X
3 Wood: MP 630 15* GRAFALLOY PROLAUNCH RED X
Hybrid: 909H 19* "Real" VooDoo X
3 - P: MP-68 KBS Tour Black Nickel X
56* 10 Wedge Vr60* 06 Wedge: VrPutter: Custom Made.Golf Ball: TOUR B330SI am the greatest, I said that even before I knew I was....

Link to comment
Share on other sites


to be more specific, what exactly do you mean by "hit or miss" with your Nike driver?

I have to disagree. If you have a proper swing, go get fitted. If you have a crappy swing, fix your swing FIRST, and then go get fitted. Why get a driver fitted, and then fix your swing, and then be stuck with a driver that was fitted to your old swing?

-Andrew
Link to comment
Share on other sites


If you go to Taylor Made website they have a driver fitting online site.

Titleist 910 D2 9.5 Driver
Titleist 910 F15 & 21 degree fairway wood
Titleist 910 hybrid 24 degree
Mizuno Mp33 5 - PW
52/1056/1160/5

"Yonex ADX Blade putter, odyssey two ball blade putter, both  33"

ProV-1

Link to comment
Share on other sites


Well its not my swing.. I can hit every club just the way I am wanting to and when I use other drivers, its fine. I am thinking the shaft I am using might not be what I am needing so I am going to try a different one and also get fitted for a new driver..

At address the Nike driver doesn't please me too much but the R9 definitely does.

- VR Pro LTD - 9.5 Ahina X

- VR_S 3, 5 woods - Fubuki X

- VR Pro Combo - 3-Pw S300's
nike.gif - VR VRev Wedges - 52, 58 

- Method 001 - 34in.

- 20XI-S

- 20XI Staff Bag

 

Link to comment
Share on other sites


At address the Nike driver doesn't please me too much but the R9 definitely does.

Just curious why would you get a driver that you didn't like at address? If I'm not happy with a club at address I'm probably not even going to bother swinging it since it's in my head I don't like it already.

Joe Paradiso

Link to comment
Share on other sites

Awards, Achievements, and Accolades

Well its not my swing.. I can hit every club just the way I am wanting to and when I use other drivers, its fine. I am thinking the shaft I am using might not be what I am needing so I am going to try a different one and also get fitted for a new driver..

if you wanna talk about every club in the bag, i look like a +2 handicap going by my irons. Drivers are by nature, much harder to control and doesn't blanket over swing errors, thus even the smallest swing error can have some big effects on your drives as opposed to your irons. At 10.7 handicap, i'd venture to say it has more to do with your swing than the driver.

regardless, if you like the R9...then why buy a new driver? Get fitetd for a shaft and stick it on the R9 and be done with it.

DST Tour 9.5 Diamana Whiteboard
909F3 15* 3 FW stock Aldila Voodoo
909F3 18* 5 FW stock Aldila Voodoo
'09 X-Forged 3-PW Project-X 6.0 Flighted
CG15 56* X-Tour 60* Abaco

Link to comment
Share on other sites


As Golfro say's go get fitted,

I was going to replace my driver a few months back, its a taylormade r7 CGB Max, instead I had it fitted. Best £50 i have ever spent. Only reason I may change it now is its rather dated but at the same time while its working it isnt going anywhere :)

The schoolteacher was taking her first golfing lesson. "Is the word spelt p-u-t or p-u-t-t?" she asked the instructor. "P-u-t-t is correct," he replied. "Put means to place a thing where you want it. Putt means merely a vain attempt to do the same thing."

 
Link to comment
Share on other sites


Note: This thread is 5142 days old. We appreciate that you found this thread instead of starting a new one, but if you plan to post here please make sure it's still relevant. If not, please start a new topic. Thank you!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


×
×
  • Create New...

Important Information

Welcome to TST! Signing up is free, and you'll see fewer ads and can talk with fellow golf enthusiasts! By using TST, you agree to our Terms of Use, our Privacy Policy, and our Guidelines.

The popup will be closed in 10 seconds...