Jump to content
Check out the Spin Axis Podcast! ×
Note: This thread is 5642 days old. We appreciate that you found this thread instead of starting a new one, but if you plan to post here please make sure it's still relevant. If not, please start a new topic. Thank you!

Recommended Posts

Posted

is it ok to hoover the driver when in stance and do a backswing without touching the groud? Most people tend to start the driver from the ground.


Posted

I hover and I think a lot of people do as well. I always see pros have the ball addressed on the toe of the driver on the ground then raise to a hover where it centers on the club.

« Keith »


Posted


Originally Posted by wrx_junki

I hover and I think a lot of people do as well. I always see pros have the ball addressed on the toe of the driver on the ground then raise to a hover where it centers on the club.



really? It seems that most pros ground the club and than backswing. I only know that kenny perry hoovers the driver and than start backswing.


Posted


Originally Posted by wrx_junki

I hover and I think a lot of people do as well. I always see pros have the ball addressed on the toe of the driver on the ground then raise to a hover where it centers on the club.



I'm no pro, but I am a person. I also hover.

Mizuno MP600 driver, Cleveland '09 Launcher 3-wood, Callaway FTiz 18 degree hybrid, Cleveland TA1 3-9, Scratch SS8620 47, 53, 58, Cleveland Classic 2 mid-mallet, Bridgestone B330S, Sun Mountain four5.


Posted

I used to hover, but I found it created additional tension in my forearms and a tendency to grip the club too tightly. Now I compensate by lining the ball up at the toe of the driver. This also prevents me from grazing the ground with the driver head.


Posted

I start with my club grounded to set my stance and then hover a bit before my back swing.  Helps me to pick the ball much better.


Posted


Originally Posted by PaladinsPhotographer

I used to hover, but I found it created additional tension in my forearms and a tendency to grip the club too tightly. Now I compensate by lining the ball up at the toe of the driver. This also prevents me from grazing the ground with the driver head.


This is exactly what happens when I hover, now I just rest it on the ground.

Driver: taylormade.gif R9 Superdeep TP 8.5* - Aldila RIP 70x | 3-Wood: taylormade.gif R9 TP 15* - Diamana Blueboard 83x | Hybrid: taylormade.gif Rescue TP 19* - Motore F3 95x | Irons: taylormade.gif RAC TP MB 3-PW - Dynamic Gold x100 | Wedges: taylormade.gif TP xFT 54.12* and 60.10* - Dynamic Gold s400 | Putter:  ping.gif Karsten Anser - 33"

Posted


Originally Posted by TaylorMadeTaylor

Quote:

Originally Posted by PaladinsPhotographer

I used to hover, but I found it created additional tension in my forearms and a tendency to grip the club too tightly. Now I compensate by lining the ball up at the toe of the driver. This also prevents me from grazing the ground with the driver head.

This is exactly what happens when I hover, now I just rest it on the ground.



Ditto.  When I rest the club on the ground, I have an added sense of relaxtion in my hands and forearm which translates to a smooth takeaway.  Actually at times when I setup with the club sitting on the ground, the loosen and then regrip, loosen and then regrip (I repeat that action 2-3 times) which really relaxes my hands, arms, body, etc.  Hovering the driver would take that sensation away totally and could lead to a tense herky jerky take away.

Deryck Griffith

Titleist 910 D3: 9.5deg GD Tour AD DI7x | Nike Dymo 3W: 15deg, UST S-flex | Mizuno MP CLK Hybrid: 20deg, Project X Tour Issue 6.5, HC1 Shaft | Mizuno MP-57 4-PW, DG X100 Shaft, 1deg upright | Cleveland CG15 Wedges: 52, 56, 60deg | Scotty Cameron California Del Mar | TaylorMade Penta, TP Black LDP, Nike 20XI-X


Posted

i start it on the ground...hovering tenses up my forearms as someone's mentioned. Bubba Watson is one of the biggest known 'hoverers' of the driver on tour i believe.

In my Titleist 2014 9.5" Staff bag:

Cobra Bio+ 9* Matrix White Tie X  - Taylormade SLDR 15* ATTAS 80X - Titleist 910H 19* ATTAS 100X - Taylormade '13 TP MC 4-PW PX 6.5 - Vokey TVD M 50* DG TI X100 - Vokey SM4 55 / Vokey SM5 60* DG TI S400 - Piretti Potenza II 365g


Posted

Ironically, that's just one of the reasons I hover - to prevent the herky jerky motion of picking the club off the ground before starting my takeaway. I started hovering a few years ago and now rarely have poor contact (poor aim is another story).

Mizuno MP600 driver, Cleveland '09 Launcher 3-wood, Callaway FTiz 18 degree hybrid, Cleveland TA1 3-9, Scratch SS8620 47, 53, 58, Cleveland Classic 2 mid-mallet, Bridgestone B330S, Sun Mountain four5.


Posted

Really eh?  Well I can definitely relate with the aim part because that is certainly one of my prblems at times...haha.  As for picking up the driver, I tend to bring it back, super low on the take away before it lifts off of the ground vs.lifting it straight up right away.  Just goes to show that there really isn't any right answer going back to golf55's OP.  Golf55, try out both ways and see which one works for you.

Deryck Griffith

Titleist 910 D3: 9.5deg GD Tour AD DI7x | Nike Dymo 3W: 15deg, UST S-flex | Mizuno MP CLK Hybrid: 20deg, Project X Tour Issue 6.5, HC1 Shaft | Mizuno MP-57 4-PW, DG X100 Shaft, 1deg upright | Cleveland CG15 Wedges: 52, 56, 60deg | Scotty Cameron California Del Mar | TaylorMade Penta, TP Black LDP, Nike 20XI-X


Posted

funny - this topic has come up with me alot lately - makes more sense to hover (to me)

John

Fav LT Quote ... "you can talk to a fade, but a hook won't listen"

Awards, Achievements, and Accolades

Posted

I believe the hover is key because it decreases the chance of stubbing the club head which results in a poor shoot. However it creates more muscle tension on your forearms which can lead to a bad shot.

All in all I think it depends on your upper body strength and preference.


Posted
I've played with both methods. I've found myself teeing it lower and resting the clubhead on the ground as of late to force myself to think more "down" and less "flip". I'm teeing it lower than I ever have before and I can't bring myself to start by hovering, as that puts the ball about halfway down the clubface to begin with. In the past, when I struggled consistently with a terrible slice, I would always hover. I think that the tension from that, while in no way was responsible for my slice, didn't help anything and likely just made it a little worse.

"Golf is an entire game built around making something that is naturally easy - putting a ball into a hole - as difficult as possible." - Scott Adams

Mid-priced ball reviews: Top Flight Gamer v2 | Bridgestone e5 ('10) | Titleist NXT Tour ('10) | Taylormade Burner TP LDP | Taylormade TP Black | Taylormade Burner Tour | Srixon Q-Star ('12)


Posted

You know what I have no idea lol.  I am going to have to check this out next time I play.  I would think I ground but who knows maybe I hover sometimes and sometimes I ground haha.


Note: This thread is 5642 days old. We appreciate that you found this thread instead of starting a new one, but if you plan to post here please make sure it's still relevant. If not, please start a new topic. Thank you!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Want to join this community?

    We'd love to have you!

    Sign Up
  • TST Partners

    Carl's Place
    PlayBetter
    Golfer's Journal
    ShotScope
    The Stack System
    FitForGolf
    FlightScope Mevo

    Coupon Codes (save 10-20%): "IACAS" for Mevo/Stack/FitForGolf, "IACASPLUS" for Mevo+/Pro Package, and "THESANDTRAP" for ShotScope. 15% off TourStriker (no code).
  • Posts

    • Day 37, June 10.  Today was primarily WFH, so I had several practice sessions (indoors, off a mat, into the net).  At least one each of U, 9, and 6-iron full swings with the usual priority.   I also tried a few times a putting type stroke with my 4H, as something I should probably learn how to hit (and what it does), but the mechanical shot at home off a mat doesn't tell me much of what it's doing.  That's something I should probably try on a real green, not during a round until I've tried it.
    • Day 10 (10 Jun 26) - Played in the midweek shootout at my home course - on aerated and sanded greens - day of trying to figure tempo to get the best roll on the greens.  Approach game was decently solid as was shots off the tee.  
    • Ok, I'm trying to find a feel to hit a consistent ball flight (irons).  My current predicament.  1. I try to do the arms down stuff better, with the club feeling like it is way behind me more. It's just a cluster of results. Most of the time, I can't get any speed on the swing. If I get my arms down faster, I just throw them out.  2. I focus all my attention on turning better. Pushing off with my left leg and getting my right side through better. On the DTL view, this doesn't produce anywhere close where the hands and club should be. The result is usually ball first contact, lower ball flight, more centered contact.  At this point, I am going with option 2. Stop thinking about what the hands do. Just make a shorter backswing, keep it wide, turn through. Somehow, the club head finds the ball. My focus is so much on just making sure I turn, it's like, "Oh, that contact was better.... Oh, that bell flight looks playable." If not, I will just be practicing my entire summer.       
    • Nope, they spent too much money. They are in over 28 million on the football roster and related NIL compensation at this point. Boosters associated with any Texas college football team has HUGE sway. The AD is between a rock and a hard place. They put a lot of money into Sorsby, at the chance of winning a NC this year. If you move on, you basically wasted a lot.  This is why Ohio State wants 3 QB's they feel can start. That is why the backups the past 5 years at some point transfer. Texas Tech has no backup near the quality of Sorsby. If they move on, they are screwed for 2026. 
    • Maybe there's something I still don't understand about the situation. Wouldn't Texas Tech do itself a favor to move on from Sorsby at this point?      
×
×
  • Create New...

Important Information

Welcome to TST! Signing up is free, and you'll see fewer ads and can talk with fellow golf enthusiasts! By using TST, you agree to our Terms of Use, our Privacy Policy, and our Guidelines.