Jump to content
Check out the Spin Axis Podcast! ×
Note: This thread is 5559 days old. We appreciate that you found this thread instead of starting a new one, but if you plan to post here please make sure it's still relevant. If not, please start a new topic. Thank you!

Recommended Posts

Posted
I have fairly large hands, very wide. I wear a 13.5 wedding ring. My fingers aren't super long, but longer than most. When I grasp a club with a standard grip, I feel as though I have to hold on for dear life or else I will drop it. I recently switched to a jumbo grip on my putter and was amazed at how much it allowed me to have soft hands. Could switching to a midsize grip give me similar benefits in the rest of my clubs?

Your desire to change has to be greater than your desire to stay the same.


Posted

Find a golf shop that does clubfittings and ask if they can measure your hand size, so you will know better if you need bigger grips.  I went through a full club fitting this past December and it turned out I needed a +2 sized grip, which is in the mid-sized range. I ordered my new irons set all with +2 grips.  I have long fingers but didn't realize I needed a bigger club grip.

2011 Goals:
* Improve club-head speed to 90 mph with the driver
* Ensure increased speed does not compromise accuracy
* Prevent overextending on the back-swing (left-arm is bending too much at the top)
* Relax arms initially at address ( too tense)* Play more full rounds (failed from 2010)


Posted

i dont wear a glove but it would be XL. i've been playing for 2.5 years, i've had my lie angles adjusted, playing the correct shaft, but never gave a thought about grip size till reading a recent article. needed to replace my grips so i decided to order some midsize pure grips. the difference is huge as far as how loose and free you can hold and maneuver the club while feeling secured. i've gained some yardage and it just feels so much more comfortable.

titleist.gif 910 D2 10.5 ProLaunch Blue S 55

:callaway: X2 Hot 3W  |  X Hot Pro 16H  |  X2 Hot 19H

:callaway: Apex 4-PW Project X 5.0 Flighted   

vokey.gif SM4 50.12, SM5 55.11
:cameron: Del Mar  |  titleist.gif NXT Tour S  


Posted

That's one thing that is pretty simple to roughly figure out for yourself with a ruler or tape measure.

http://www.golfgrips-direct.com/acatalog/Grip_Sizing.html

Stretch.

"In the process of trial and error, our failed attempts are meant to destroy arrogance and provoke humility." -- Master Jin Kwon

Awards, Achievements, and Accolades

  • Moderator
Posted

Definitely made a difference for me.  I have long thin fingers and would wear an XL glove just for length in the fingers.  I switched to mid-size and am able to maintain a good hold on the club now with light pressure.  If you have to grip hard, you are tensing up your wrist muscles and that will affect your hinging and unhinging during the swing.

Scott

Titleist, Edel, Scotty Cameron Putter, Snell - AimPoint - Evolvr - MirrorVision

My Swing Thread

boogielicious - Adjective describing the perfect surf wave

Awards, Achievements, and Accolades

Posted
I also have long, thin fingers. (An L/XL glove size depending on the model.) I can play with regular-sized grips, but when I switched to midsize it was a great improvement. I even tried jumbo grips and they felt OK, but I didn't like them nearly as much as the mid-size.

"Golf is an entire game built around making something that is naturally easy - putting a ball into a hole - as difficult as possible." - Scott Adams

Mid-priced ball reviews: Top Flight Gamer v2 | Bridgestone e5 ('10) | Titleist NXT Tour ('10) | Taylormade Burner TP LDP | Taylormade TP Black | Taylormade Burner Tour | Srixon Q-Star ('12)


Posted

I have a jumbo grip on one of my putters (for wrist stability more than anything) and my favorite grips are Golf Pride New Decade Multi Compounds white in midsize. With bigger hands, midsize is great because you don't have to grip it as hard. For me it makes a world of difference.

In my bag:

Driver: Titleist TSi3 | 15º 3-Wood: Ping G410 | 17º 2-Hybrid: Ping G410 | 19º 3-Iron: TaylorMade GAPR Lo |4-PW Irons: Nike VR Pro Combo | 54º SW, 60º LW: Titleist Vokey SM8 | Putter: Odyssey Toulon Las Vegas H7

Awards, Achievements, and Accolades

  • 3 weeks later...
Posted

I love, love, love, my Winn Lite Oversize grips!

Buy one, put it on your 7 iron and go to the range. You will quickly know whether or not the larger grip is for you. You don't want to have a grip pressure that is too tight or it will inhibit your swing! The old teachers used to say that at the top of your backswing, someone should be able to take the club out of your hands because you are holding it with the pressure of keeping a live bird in your hands.

Sounds like you are squeezing the life out of your current grips.

Titleist 910D2 10.5* Stiff / Taylormade 3 Wood - Superfast 2.0 15*  3 Superfast 2.0 Rescue 18* Stiff Shafts


Posted

I'm testing a midsize on my driver, don't know if it'll stick around that long, but i love oversize grips on my putter, I even have them add more tape underneath to make it even bigger!

Still trying to find my swing!


Posted

according to the fitting charts i'm a regular size but i've played my best with midsize.. what i tell all my clients is to try various grip sizes and textures to find what works regardless of some chart.  only YOU know what feels right to YOU.

KZG Gemini 9* Aldila Proto By You
Leyland COPlasma 3wd
Golfsmith Q4 19*
Louisville HyLofter 24*
Wishon 770CFEs w/Nippons
Alpha P2 wedges
Louisville EWP putter


Note: This thread is 5559 days old. We appreciate that you found this thread instead of starting a new one, but if you plan to post here please make sure it's still relevant. If not, please start a new topic. Thank you!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Want to join this community?

    We'd love to have you!

    Sign Up
  • TST Partners

    Carl's Place
    PlayBetter
    Golfer's Journal
    ShotScope
    The Stack System
    FitForGolf
    FlightScope Mevo

    Coupon Codes (save 10-20%): "IACAS" for Mevo/Stack/FitForGolf, "IACASPLUS" for Mevo+/Pro Package, and "THESANDTRAP" for ShotScope. 15% off TourStriker (no code).
  • Posts

    • Probably since the golfer has to swing the club back and up. The hands have to move back and up. You can feel them go back and up just by turning the shoulders and bending the right arm, because it brings your hands towards your right shoulder.  The difference is if you maintain width or not. Less width means a shorter feeling swing path so the more you need to lift the arms. Being as someone who gets the right arm bend at 110+ degrees, it's 100% a timing issue. I am use to like a 1.5+ second backswing. It probably should be like 1 second at most. Half a second or more will feel like an eternity. I have had swings where I keep my right arm straighter and I am still trying to time the downswing based on the old tempo.  Ideally, for me, it is probably going to be a much quicker and shorter (in duration) backswing, while keeping the right elbow straighter. Which also means more hinging to get swing length without over swinging. 
    • Wordle 1,789 5/6 ⬜⬜⬜⬜⬜ ⬜⬜🟨⬜⬜ ⬜🟩⬜🟩🟩 ⬜🟩🟨🟩🟩 🟩🟩🟩🟩🟩
    • I'm currently recuperating from surgery, so no golf, but have been thinking about this quite a bit. This and the don't overbend the right arm thing. It's hard for me to even pose the position, so I'm not 100% sure, but I feel like it's impossible to have the right humerus along the shirt seam and not overbend your right arm, unless your hands are down near your hips. If the left arm is up at or above the shoulder plane and your right arm is bent less than 90 degrees, then your right humerus has to raise or your hands will get pulled apart. Your left hand can't reach your right hand unless either the right upper arm is up or the right arm is overbent. Is that right? If it is, then focusing on not overbending the right arm would force you to raise the humerus. And actually thinking further on it, if you do overbend your right arm, then you're basically forcing your upper arm down or forcing your left arm to bend. Since (for me at least) bending the left arm too much is not something I think I need to worry about, it means that the bend in the trail arm is really the driving force behind what happens to the right humerus. 
    • I managed to knock off a 3, a 13, and a 15 a couple of weeks ago. The 3 was a 185 yard par 3 with a 6 iron to 12 feet. 13 was a 350 yard par 4, which was a 2 iron and a 9 iron to about a foot. 15 was a 560 yard par 5 with a driver in a bunker, 4 iron into the semi, gap wedge to 8 feet and a putt.
    • Wordle 1,789 4/6* ⬜⬜⬜⬜⬜ ⬜⬜🟨⬜⬜ 🟨🟩⬜⬜🟩 🟩🟩🟩🟩🟩
×
×
  • Create New...

Important Information

Welcome to TST! Signing up is free, and you'll see fewer ads and can talk with fellow golf enthusiasts! By using TST, you agree to our Terms of Use, our Privacy Policy, and our Guidelines.