Jump to content
Check out the Spin Axis Podcast! ×
IGNORED

Marking your golf ball.........


Note: This thread is 5048 days old. We appreciate that you found this thread instead of starting a new one, but if you plan to post here please make sure it's still relevant. If not, please start a new topic. Thank you!

Recommended Posts

Posted

Do you mark your golf ball?  If so, how do you mark it?

I've marked mine in various subtle ways over the years.  It wasn't until this past year that my ball marking took a drastic turn for the dramatic for many various reasons. Mostly in fun...

004.jpg

I write it on both sides...........big letters.

There's no way my ball can be mistakenly hit by another golfer...LOL    I've had club members who know my mark return my lost balls to me.   They return it with a big laugh as they toss it to me saying...... "I found one of your sh!t balls" .   Funny stuff.  Nobody wants to keep them....

How do you mark?

What's in Paul's Bag:
- Callaway Big Bertha Alpha Driver
- Big Bertha Alpha 815 3-wood
- Callaway Razr Fit 5-wood
- Callaway Big Bertha 4-5 Rescue Clubs
-- Mizuno Mx-25 six iron-gap wedge
- Mizuno Mp-T4 56degree SW
- Mizuno Mp-T11 60degree SW
- Putter- Ping Cadence Ketsch


  • Replies 106
  • Created
  • Last Reply

Top Posters In This Topic

Posted

A green or pink dot on each side of the brand and thats it....I'd get too distracted with more, lol

My philosophy on golf "We're not doing rocket science, here."


Posted

I don't mark them.  I don't see the point.  If I'm playing with people, it's not that hard to know which ball is yours

In my bag:
Driver - Diablo Octane 10.5*
Fairway Wood - Diablo Octane 15*
Hybrid -  Edge 21*
Irons - X20's 4I - 9I
Wedges - X20's PW/SW
Putter - White Ice 1
Ball - Warbird
 

 


Posted

the point of marking them is so you know which is yours from ANY ball, really.  I don't have to physically pick my ball up and check to see if its the right number and everything like a lot of people end up doing.

My philosophy on golf "We're not doing rocket science, here."


Posted
I draw faces on my golf balls. Sometimes a simple two dots and curved line for eyes and a mouth. Sometimes I'll make him a pirate with an eye patch or Harry potter with glasses and a lightning bolt scar. The best part is when I walk up to my ball and it's smiling back at me.

Posted
Originally Posted by KingG

I draw faces on my golf balls. Sometimes a simple two dots and curved line for eyes and a mouth. Sometimes I'll make him a pirate with an eye patch or Harry potter with glasses and a lightning bolt scar.

The best part is when I walk up to my ball and it's smiling back at me.

I use a smiley face.  Keeps me laughing and takes my mind off the previous shot.  If I am feeling lazy a straight line under the number does the trick.


Posted
Originally Posted by JerryTimes

I don't mark them.  I don't see the point.  If I'm playing with people, it's not that hard to know which ball is yours

I beg to differ.....most people remember the brand, but forget which number half the time.  Even if they remember the brand and number......and hit it......they find a different model.

What's in Paul's Bag:
- Callaway Big Bertha Alpha Driver
- Big Bertha Alpha 815 3-wood
- Callaway Razr Fit 5-wood
- Callaway Big Bertha 4-5 Rescue Clubs
-- Mizuno Mx-25 six iron-gap wedge
- Mizuno Mp-T4 56degree SW
- Mizuno Mp-T11 60degree SW
- Putter- Ping Cadence Ketsch


Posted

Lately, I've been putting a red dot on both sides of the name (Top-Flite), but I've marked my balls in other ways before.

Tristan Hilton

My Equipment: 
Titleist TSR2 Driver (Fujikura Pro 2.0 TS; 10.5°) · PXG 0211 FWs (Diamana S+ 60; 15° and 21°) · PXG 0211 Hybrid (MMT 80; 22°) · Edel SMS Irons (SteelFiber i95; 5-GW) · Edel SMS Pro Wedges (SteelFiber i110; 56°, 60°) · Edel Classic Blade Putter (32") · Maxfli Tour Ball · Pinned Prism Rangefinder · SuperStroke Grips · Flightscope Mevo · TRUE Linkswear Shoes · Vessel Player V Pro 

Awards, Achievements, and Accolades

Posted

I put a V on mine on both sides.  If it's a callaway i just put it right outside the V that's there.


Posted
I write my initials in Arabic. . كام Pretty easy to identify, even without knowing the make and number.

Occam's razor


Posted

Geeezus Buckeye, how the heck to hit the ball like that, with all the writing? LOL

When I play in Tournaments, we have to mark our balls, and each have to identify our balls in our group on the first tee.

I like very minimal markings on mine. Just a black dot next to the number.

Driver: Callaway Big Bertha 10.5* 

3WD:  Callaway Big Bertha 15* / X2 Hot H4 Hybrid
Irons:  Callaway Apex 4-PW Project X 5.5 shafts

Wedges: Callaway MackDaddy 2  52/58
Putter: Odyessey Metal X Milled 1


Posted

Back when covers were made of balata, I used to mark mine with a big ole' iron gash.


Posted

I play non-white balls, so it's always easy to spot mine

John

Fav LT Quote ... "you can talk to a fade, but a hook won't listen"

Awards, Achievements, and Accolades

Posted
Just getting the red ink all over my club faces would be enough to annoy me...

titleistprov1x |nikeneo |●| callawayx-forged 54/60 |● |mizunoMP68

adamsproblack 3H |●| mizunoMPtitanium5w/3w |●| mizunoMP630FT


Posted

i "sign" my ball with my initials on both sides w/ a red sharpie.  its not as big as sh!t ball up there, but its somewhat close.   it works out great because i can see the ball is mine from 10+ yards away.  i see people pick up balls to identify them all the time, and i HATE that.  i've even had a-holes pick up my ball, with the big read scribble on it, to check who's it is!   argh!  call it one of my pet peeves.

though as someone mentioned above, i do have a couple red marks on my driver, but its minor.

In my Grom Stand bag:

 

Driver: Ping G20, 8.5 Tour Stiff
Wood/Hybrid: G20 3W, Raylor 19*, 22*
Irons: R9 5I - SW, TM CGB LW

Putter: Scotty Cameron Kombi-Mid

Favorites: Old Ranch (Seal Beach), Ike/Babe (Industry Hills), Skylinks (Long Beach), Desert Willow (Palm Desert)


Posted

Buckeye....kind of an obnoxious ball mark don't you think.  Not very funny but to each his own.

I don't usually mark my ball because I play a Top Flit Gamer V2 most of the time and I rarely see them on the course.  Most wouldn't be caught dead using a Top Flite ball while those that do will usually go with one of the XL models. If I do mark, it's usually a simple dot near the T on Top Flite. Looks like I do half of what Triston does for marking.

I take the attitude that I really don't own the ball.  I'm just borrowing it until I donate it to the golfing community in hopes that someone else will get more use out of it than I did, so I keep the marks modest.

Driver:  Callaway Diablo Octane iMix 11.5*
Fairway: Cobra Baffler Rail F 3W & 7W
Irons:  Wilson Ci
Wedges:  Acer XB (52* & 56*)
Putter:  Cleveland Classic #10 with Winn Jumbo Pistol Grip


Posted
Originally Posted by Topper

Buckeye....kind of an obnoxious ball mark don't you think.  Not very funny but to each his own.

I don't usually mark my ball because I play a Top Flit Gamer V2 most of the time and I rarely see them on the course.  Most wouldn't be caught dead using a Top Flite ball while those that do will usually go with one of the XL models. If I do mark, it's usually a simple dot near the T on Top Flite. Looks like I do half of what Triston does for marking.

I take the attitude that I really don't own the ball.  I'm just borrowing it until I donate it to the golfing community in hopes that someone else will get more use out of it than I did, so I keep the marks modest.


The gamer V2 is 10x the ball the shitty xl series is.

I mark my ititials on both sides. Small letters.

In the Ogio Kingpin bag:

Titleist 913 D2 9.5* w/ UST Mamiya ATTAS 3 80 w/ Harrison Shotmaker & Billy Bobs afternarket Hosel Adaptor (get this if you don't have it for your 913)
Wilson Staff Ci-11 4-GW (4I is out of the bag for a hybrid, PW and up were replaced by Edel Wedges)
TaylorMade RBZ 5 & 3 Fairway Woods

Cobra Baffler T-Rail 3 & 4 Hybrids

Edel Forged 48, 52, 56, 60, and 64* wedges (different wedges for different courses)

Seemore Si-4 Black Nickel Putter


Posted
Originally Posted by The Gill

Just getting the red ink all over my club faces would be enough to annoy me...

LOL...yea....that definitely happens.   I turn the ink away on the tee, but 2nd shots definitely get ink.  At worst....you can easily see where club-met-ball!!!   It wipes away with a wet towel....the sharpie doesn't stain the clubface.

What's in Paul's Bag:
- Callaway Big Bertha Alpha Driver
- Big Bertha Alpha 815 3-wood
- Callaway Razr Fit 5-wood
- Callaway Big Bertha 4-5 Rescue Clubs
-- Mizuno Mx-25 six iron-gap wedge
- Mizuno Mp-T4 56degree SW
- Mizuno Mp-T11 60degree SW
- Putter- Ping Cadence Ketsch


Note: This thread is 5048 days old. We appreciate that you found this thread instead of starting a new one, but if you plan to post here please make sure it's still relevant. If not, please start a new topic. Thank you!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Want to join this community?

    We'd love to have you!

    Sign Up
  • TST Partners

    Carl's Place
    PlayBetter
    Golfer's Journal
    ShotScope
    The Stack System
    FitForGolf
    FlightScope Mevo

    Coupon Codes (save 10-20%): "IACAS" for Mevo/Stack/FitForGolf, "IACASPLUS" for Mevo+/Pro Package, and "THESANDTRAP" for ShotScope. 15% off TourStriker (no code).
  • Posts

    • Day 254 5-4 Arms off chest in backswing and downswing. Short swing, pause and then hit.  Hit foam balls. Keeping arching of wrist a focus as well. 
    • I would think of it in terms of time. The time it takes to get the arm angle into a good position to deliver the club with proper shaft lean. Another component is rotation, but that is also a matter of timing. It relates to how the body stalls to give the golfer time to hit the ball. If you have to get 80+ degrees out of that right elbow in one third of a second versus 50 degrees in the same time then you have to steal time from somewhere. It is usually body rotation. That does not help with shaft lean.  I agree in that amateurs tend to make the swing more complicated than pro golfers. 
    • I haven't been able to practice like I wanted and won't for the next week.  1. The weather sucks in Ohio this year. I have been mostly inside hitting foam balls. Just kind of my basic stuff.  2. I woke up last Saturday with a left side rib muscle on fire. If I turned or leaned a certain way it would spasm that almost buckled my knees. I have been taking a break to let that settle. I don't want to get a long term injury. I think I pinched a nerve or just aggravated a muscles.   3. I am going on a mini-vacation to Florida (screw you Ohio weather) with a friend, and rolling that into a work conference I have next week. I will be with out my clubs for a week.  I will be back next in two Fridays to hit the ground running with some warmer temps and better weather in Ohio, hopefully. I would really like to get more out on the course and the range.     
    • Day 580 - 2026-05-04 Played eight holes. Sometimes golf kicks you in the nuts. 😉 
    • I work with a lot of golfers who want more shaft lean at impact, who currently have AoAs that range from +2° to -2°, and who love to see the handle lower and more "in front of their trail thigh" from face-on at P6. And a lot of these golfers try to solve the issue by working on the downswing. They do something to drag the handle forward. Or they just leave their right thigh farther back so the same handle location "looks" farther forward. Or they move the ball back in their stance. Or they push themselves down into the ground to get the handle lower and increase (decrease?) their AoA (to be more negative). The real fix is often to get wider in the backswing. To do LESS in the backswing. To hinge less, fold the trail arm less, abduct the trail arm less. I had a case of this over the weekend. Before, the player had 110° of trail elbow bend, "lifted" his trail humerus only a few degrees, etc. The club traveled quite a bit around him, and he tended to "pick" the ball from the fairways. In the "after" swings below (which are mild exaggerations — this golfer does not need to end up at < 70° of elbow bend. These were slower backswings with "hit it as hard as you normally would" intent downswings), you can see that he bent his elbow about 70° instead of 110° and lifted his right arm an extra ~15° or more. You can't see how much less this moved his hands across his chest (right arm abduction), but it was also decreased. His hands stayed more "in front of" his right shoulder rather than traveling "beside" them so much. The two swings look like this: The change at P6, without talking about the downswing one little bit (outside of him telling me that he tends to pick the ball), is remarkable: Without 110° of elbow bend to get out (which he gets to 80°, a loss of 30°), the golfer actually loses slightly less elbow bend (70 - 50 = 20), but delivers 30° less elbow bend, lowering the handle and letting the elbow get "in front of" the rib cage… because it never got "behind" or "beside" the rib cage. If you look at this video showing the before/afters of P6, you'll note the handle location (both vertically and horizontally) and the shoulders (the ball is in the same place in these frames). This golfer's path was largely unaffected (still pretty straight into the ball, < 3° path and often < 1.5°), but his AoA jumped to -5° ± 2°. I've always said, and in talking with other instructors they agree and feel similarly, that we spend a lot of time working on the backswing. This is another example of why.
×
×
  • Create New...

Important Information

Welcome to TST! Signing up is free, and you'll see fewer ads and can talk with fellow golf enthusiasts! By using TST, you agree to our Terms of Use, our Privacy Policy, and our Guidelines.