Jump to content
IGNORED

Groove Sharpening


Note: This thread is 2169 days old. We appreciate that you found this thread instead of starting a new one, but if you plan to post here please make sure it's still relevant. If not, please start a new topic. Thank you!

Recommended Posts

What tools do you guys use, such as a dremel or a special tool? And how far can you sharpen them before they become illegal?
What's In The Bag?

Driver - Rapture 10.5 Epic 68g X-Pure - Balance Certified
Fairway Metal - Titleist PT 18°
Irons - Mizuno MP-67 3-PW Project X 6.0 Wedges - Mizunos R Series Chrome 52°, 56°, 58° Project X 6.0 Putter - Yes! C-Groove Callie-f - Balance Certified Bag - Ping Freestyle...
Link to comment
Share on other sites


  • Administrator
What tools do you guys use, such as a dremel or a special tool? And how far can you sharpen them before they become illegal?

They tend to come right at the limit, and I'm not sure you can really do much before they become illegal. Groove rules go down to the thousandth of an inch.

I suggest it's not worth the hassle. Clean them and then forget about them.
  • Informative 1

Erik J. Barzeski —  I knock a ball. It goes in a gopher hole. 🏌🏼‍♂️
Director of Instruction Golf Evolution • Owner, The Sand Trap .com • AuthorLowest Score Wins
Golf Digest "Best Young Teachers in America" 2016-17 & "Best in State" 2017-20 • WNY Section PGA Teacher of the Year 2019 :edel: :true_linkswear:

Check Out: New Topics | TST Blog | Golf Terms | Instructional Content | Analyzr | LSW | Instructional Droplets

Link to comment
Share on other sites

Awards, Achievements, and Accolades

K, thanks a lot iacas.
What's In The Bag?

Driver - Rapture 10.5 Epic 68g X-Pure - Balance Certified
Fairway Metal - Titleist PT 18°
Irons - Mizuno MP-67 3-PW Project X 6.0 Wedges - Mizunos R Series Chrome 52°, 56°, 58° Project X 6.0 Putter - Yes! C-Groove Callie-f - Balance Certified Bag - Ping Freestyle...
Link to comment
Share on other sites


  • 1 year later...
Anybody buy one of these gadgets for their wedges? Does it work?

Need anything that will help me spin the ball back on up/down shots.
Newbie: (Handicap unknown)
What's in my bag?
R7 460 10.5*
3 & 5 Wood
X-12 Irons w/ Graphite ShaftsTom Watson Sand Wedge 55* Putter
Link to comment
Share on other sites


I received the Izzo Golf Club Medic Groove Tool as a gift last year ( http://www.tgw.com/customer/category...TEGORY_ID=4817 ). I thought it was gimicky but after using the tool it actually works pretty well. Doesn't take that much effort and has pretty nice results, now as for backing balls up no tool is going to give you that. The only concern I had with this tool is I'm still not sure if the tool regrooves or sharpens with a V groove pattern. I believe it does use a v groove but there is a tool at golfsmith that has a V and a U bit. That might be a better option, but this one works well and at 9.95 it doesn't hurt the wallet. Plus its bright green so its really hard to lose it around the house.

Daniel Duarte
905R UST Proforce V2 76g 44" S
904F 15, Graphite Design YS6+
MD Hybrid, 19 Degree, UST V2 Hybrid S
Pro M Gunmetal 5-PW, Nippon 1150GH Pro SVokey Oil Can 52 - RAWVokey Spin Milled Oil Can 56, 60 - RAWTEI3 Newport II - Torch Copper- Prov1x

Link to comment
Share on other sites


Just stick a little skateboard tape on the face of your club, that should do the trick just fine..........it's not legal, but is sure is fun to hit a high flop shot on the practice green and bring a ball back 15 feet. People immediately freak out and ask you how you do it. It's a fun way to start up a conversation with people.
Rynofskie

In My Well-Used Highlander Bag:

Driver:Redline RPM 9.5* Driver - TourLaunch Blue Shaft Rescue: "The Ripper" wal-mart special 3HybridIrons: ADAMS GT500 Undercut Widesole 4-LWPutter: Ray Cook custom mallet putterGuns don't kill people - the proper application of sight alignment, target...
Link to comment
Share on other sites


  • 1 month later...
Hey folks, have any input on a good quality groove sharpener that wont break the bank? I have tried the IZZO tool ($9.95) but it was dull after one wedge. I was looking for something that I can use for a while without replacing it. Thanks
In My Bag:

Driver::Louisville Golf - Smart Persimmon 9.5*
Irons:CG2 3-PW
Wedges:Reg. 588's (SW, LW)Putter:Studio Design 1Ball:Pro-v1Bag:Pro Stand Deluxe
Link to comment
Share on other sites


really? thats really strange, I've had the izzo tool for over two years now and I sharpen my wedges almost once a week when I clean my clubs. When I turn the edge down on my wedges I can see fresh scoring lines and my wedges always check up for me. Thats really strange, sorry to hear that man.

check out golfworks, golfsmith.com - they should have one, under 20 bills

Daniel Duarte
905R UST Proforce V2 76g 44" S
904F 15, Graphite Design YS6+
MD Hybrid, 19 Degree, UST V2 Hybrid S
Pro M Gunmetal 5-PW, Nippon 1150GH Pro SVokey Oil Can 52 - RAWVokey Spin Milled Oil Can 56, 60 - RAWTEI3 Newport II - Torch Copper- Prov1x

Link to comment
Share on other sites


really? thats really strange, I've had the izzo tool for over two years now and I sharpen my wedges almost once a week when I clean my clubs. When I turn the edge down on my wedges I can see fresh scoring lines and my wedges always check up for me. Thats really strange, sorry to hear that man.

No kidding, mine seemed to dull almost instantly. I did get good results on the one wedge, but after that it was almost worthless. Maybe I got one from a bad batch or something. Just curious, are you using a softer forged iron? That could be the difference.

In My Bag:

Driver::Louisville Golf - Smart Persimmon 9.5*
Irons:CG2 3-PW
Wedges:Reg. 588's (SW, LW)Putter:Studio Design 1Ball:Pro-v1Bag:Pro Stand Deluxe
Link to comment
Share on other sites


I understand these are really good and pretty cheap

http://www.golfwrx.com/forums/index....owtopic=111789

Driver- Geek Dot Com This! 12 degree Matrix Ozik Xcon 6 Stiff
Adams Tour Issue 4350 Dual Can Matrix Ozik Xcon 5

Hybrids- Srixon 18 deg
Srixon 21 deg Irons- Tourstage Z101 3-PW w/Nippon NS Pro 950 GH - Stiff Srixon i701 4-PW w/ Nippon NS Pro 950 GH-Stiff MacGregor...

Link to comment
Share on other sites


I got one from golfsmith.com that has been reliable. It comes with a replacement blade as well.

In the bag:

Burner 10.5
Rescue mid 16, 19, 22, 25
X-16 irons Forged+ Vintage 48, 54, 60 Circa 62 #3 A009125

Link to comment
Share on other sites


I'm using them on my vokeys, I rarely will resharpen my irons. I like the utility blade style holder, makes it feel very comfortable in the hand.

Daniel Duarte
905R UST Proforce V2 76g 44" S
904F 15, Graphite Design YS6+
MD Hybrid, 19 Degree, UST V2 Hybrid S
Pro M Gunmetal 5-PW, Nippon 1150GH Pro SVokey Oil Can 52 - RAWVokey Spin Milled Oil Can 56, 60 - RAWTEI3 Newport II - Torch Copper- Prov1x

Link to comment
Share on other sites


Why cant you use a knife

In my Warbird Bag,
I have
Burner Driver 460cc 9.5* Stiff
Three and Five Woods
Precise- 21* and 24* hybridsCCi Cast Irons-4-AW 52* and 56*/14 Vokey 60*/8and i play TP Black or ProV1

Link to comment
Share on other sites


yeah those IZZO shapeners work really well

In the OGIO OZONE Bag
Driver: SuperQuad 9.5
3 Wood- V steel 15 ALDILA NV s
Irons- Hogan Apex FTX
Wedges- CG14 52 56Putter- Odyssey XG model #9Ball- Pro v 1 xShoes- Adidas Tour Metal

Link to comment
Share on other sites


  • 5 months later...
I was talking with my golfing partner about sharpening the grooves on our wedges.

I have seen the Club Medic Groove Sharpener that resembles a "utility knife" with a blade that looks as though it sharpens the grooves.

Has anyone had any experience with this? Or, is there another was to get sharper grooves. I love my wedges and I'm not looking to replacing them but would like the "new groove" feel again.
Je joue au golf, et j'aime ca.
-------------------------------------
Nike SasQuatch Sumo2
HaLo 2i & 3i
3100 I/H 5-GW588 Gunmetal 53/56/60White Hot XG #2Vector BagProV1x
Link to comment
Share on other sites


Hey i have the best piece of advice for you. I sharpen my grooves with a paint can opener. you know the ones that get under the lid. They are medal and are perfect size to fit in the grooves of a wedge.. best wishes kid

"People think the size of the head is most important. Wrong. It's getting a quality shaft. test different shafts to see which goes the straightest. Also, more degrees of loft on the head is better than less. Eleven degrees is about right."

Link to comment
Share on other sites


I was talking with my golfing partner about sharpening the grooves on our wedges.

The reviews on this were not very good. What you can try is find a local club fitter. Either have him make a recommendation or have him sharpen the grooves for you.

You can also reach out to The Iron Factory. They refinish heads, good as new and it's less expensive than purchasing a new club.

Titleist 905T Accra SC75 M4 Shaft

Nike SQ 4W Accra T70 M4 Shaft
HB001 17* Hybrid with Mitsubishi Diamana Thump X Stiff Flex
Baffler Pro 20* Accra Axiv 105 Tour Hybrid Shaft

Taylor Made 24* Burner Accra Axiv 105 Tour Hybrid Shaft

Mizuno MP-32 5-PW Black Oxide Finish Project X 6.0 Shafts

Vokey 52* Oil Can Finish TTDG S400 Shaft

Cleveland 588 60* TTDG S400 Shaft

Rife Bimini Blade Putter

 

Ball-White and Round

 

Link to comment
Share on other sites


Note: This thread is 2169 days old. We appreciate that you found this thread instead of starting a new one, but if you plan to post here please make sure it's still relevant. If not, please start a new topic. Thank you!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Want to join this community?

    We'd love to have you!

    Sign Up
  • TST Partners

    TourStriker PlaneMate
    Golfer's Journal
    ShotScope
    The Stack System
    FlightScope Mevo
    Direct: Mevo, Mevo+, and Pro Package.

    Coupon Codes (save 10-15%): "IACAS" for Mevo/Stack, "IACASPLUS" for Mevo+/Pro Package, and "THESANDTRAP" for ShotScope.
  • Posts

    • Day 85 - Played 9. Driver was solid, approach shots were pushed, chipping/pitching was better, putting was rough. 
    • Day 514, March 28, 2024 Quick ten minutes while waiting for the wife to come home for our trip.
    • Day 262: did a stack session. Worked on rehearsal swings during rest breaks. 
    • It's been a little more than a year since I can last remember hitting golf balls and today I just got my second cortisone injection in 11 months. I thought maybe shortly after the first injection I was going to be able to start playing again with therapy but the pain while doing my backswing past halfway just didn't subside like just lifting my hands up in the air did. So today the Orthopedic surgeon put more in the backside of the shoulder than before to address the tendon more. I'm going to try therapy for another 3 months and if I  can't swing the club without pain then I think surgery is going to be my next option.
    • I was just down visiting family in southern California and we played a couple rounds of golf. I hit my ball into the deep rough near some tree's and my cousin's husband offered me his Sim 2 Rescue Hybrid to try out. And I felt the same way, wow! I loved it, it also had a Pure DTX grip on it which I loved. As soon as I got back home, I ended up buying two used Calloway Rogue X hybrids, 3 and 5. So far I've only tested them out at the range, but I love them. They're much more forgiving than irons for me.
×
×
  • Create New...

Important Information

Welcome to TST! Signing up is free, and you'll see fewer ads and can talk with fellow golf enthusiasts! By using TST, you agree to our Terms of Use, our Privacy Policy, and our Guidelines.

The popup will be closed in 10 seconds...