Jump to content
Note: This thread is 3508 days old. We appreciate that you found this thread instead of starting a new one, but if you plan to post here please make sure it's still relevant. If not, please start a new topic. Thank you!

Recommended Posts

Yeah, it's probably from their "manly" rough over there. ;)

LOL, probably. ;). How are your i20s holding up?

Nate

:tmade:(10.5) :pxg:(4W & 7W) MIURA(3-PW) :mizuno:(50/54/60) 

 

Awards, Achievements, and Accolades

  • Replies 83
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

LOL, probably. ;). How are your i20s holding up?

No, mine don't show any issues like that. [quote name="mvmac" url="/t/61817/i20-iron-problem/30#post_997920"] Do your i20's have any peeling problems? [/quote]Nope.

Awards, Achievements, and Accolades

Ping took a lot of heat for the laminate problem on the i20's.  From what I've read they did away with the laminate on the i25's but not sure about the others.

Joe Paradiso

Awards, Achievements, and Accolades

Ping took a lot of heat for the laminate problem on the i20's.  From what I've read they did away with the laminate on the i25's but not sure about the others.

Hopefully that is the case.

Nate

:tmade:(10.5) :pxg:(4W & 7W) MIURA(3-PW) :mizuno:(50/54/60) 

 

Awards, Achievements, and Accolades

Wow I did not see this thread at all before I bought mine last summer, I probably would have went with another brand just to avoid the possibility of this happening to me.  And the douche at the store didn't mention this to me either which chaps my ass more than anything.


Wow I did not see this thread at all before I bought mine last summer, I probably would have went with another brand just to avoid the possibility of this happening to me.  And the douche at the store didn't mention this to me either which chaps my ass more than anything.

I would not worry too much, the problem is pretty rare. Hopefully your irons will be fine.

Nate

:tmade:(10.5) :pxg:(4W & 7W) MIURA(3-PW) :mizuno:(50/54/60) 

 

Awards, Achievements, and Accolades

  • Moderator

Wow I did not see this thread at all before I bought mine last summer, I probably would have went with another brand just to avoid the possibility of this happening to me.  And the douche at the store didn't mention this to me either which chaps my ass more than anything.

It's not a "common" issue with the irons so the guy probably didn't even know about it. How are your irons doing? Are they peeling?

Mike McLoughlin

Check out my friends on Evolvr!
Follow The Sand Trap on Twitter!  and on Facebook
Golf Terminology -  Analyzr  -  My FacebookTwitter and Instagram 

Awards, Achievements, and Accolades

I contacted a Ping rep, the one I dealt with the last time to see it the i25s have this laminate ot not. I will report back.

Nate

:tmade:(10.5) :pxg:(4W & 7W) MIURA(3-PW) :mizuno:(50/54/60) 

 

Awards, Achievements, and Accolades

  • Moderator

I contacted a Ping rep, the one I dealt with the last time to see it the i25s have this laminate ot not. I will report back.

Please do, hope @newtogolf is right about that

Mike McLoughlin

Check out my friends on Evolvr!
Follow The Sand Trap on Twitter!  and on Facebook
Golf Terminology -  Analyzr  -  My FacebookTwitter and Instagram 

Awards, Achievements, and Accolades

Please do, hope @newtogolf is right about that

Looking at them today at Golfsmith I think they do as you mentioned, but I will find out for sure.  I went there to check out the G25s but when I put them down at address and I kinda threw up in my mouth a little bit.  I hit the AP1s and the AP2s a little bit and liked those.  If I were to get those I would probably get like AP1 4 and 5 irons and AP2 6-9.  I will probably just end up finishing off my s55 set though eventually and keep the i20s as a backup.  I will be sure to let everyone know what they say about the i25s and the laminate.

Nate

:tmade:(10.5) :pxg:(4W & 7W) MIURA(3-PW) :mizuno:(50/54/60) 

 

Awards, Achievements, and Accolades

Looking at them today at Golfsmith I think they do as you mentioned, but I will find out for sure.  I went there to check out the G25s but when I put them down at address and I kinda threw up in my mouth a little bit.  I hit the AP1s and the AP2s a little bit and liked those.  If I were to get those I would probably get like AP1 4 and 5 irons and AP2 6-9.  I will probably just end up finishing off my s55 set though eventually and keep the i20s as a backup.  I will be sure to let everyone know what they say about the i25s and the laminate.

So you currently have a few S55's which ones and how would you compare them to the i20's?

Awards, Achievements, and Accolades

So you currently have a few S55's which ones and how would you compare them to the i20's?

I just have a 8 and 9 iron I have been using.  They are very accurate.  I draw them a bit less(which I like), and they are honestly a bit tougher to hit overall, but I have been getting used to them.  Not quite sure I am good enough for them though, but it is fun to try.

Nate

:tmade:(10.5) :pxg:(4W & 7W) MIURA(3-PW) :mizuno:(50/54/60) 

 

Awards, Achievements, and Accolades

Your good enough. The long irons might take a bit to get used to but you're a beast.   Do they feel noticeably softer than the i20's?

Awards, Achievements, and Accolades

Your good enough. The long irons might take a bit to get used to but you're a beast.   Do they feel noticeably softer than the i20's?

Yeah they do feel a bit softer, but I think it is the sound that gives you that sense more than anything else.  Not as forgiving on toe hits, but I have noticed they are every bit as forgiving off the hosel! ;-)

Nate

:tmade:(10.5) :pxg:(4W & 7W) MIURA(3-PW) :mizuno:(50/54/60) 

 

Awards, Achievements, and Accolades

Yeah they do feel a bit softer, but I think it is the sound that gives you that sense more than anything else.  Not as forgiving on toe hits, but I have noticed they are every bit as forgiving off the hosel!

Ha nice.  Im sure you would be fine with the s55's.  How did you get an 8 & 9 iron?

Awards, Achievements, and Accolades

Ha nice.  Im sure you would be fine with the s55's.  How did you get an 8 & 9 iron?

My philosophy is buy it before you try it. ;-)

Nate

:tmade:(10.5) :pxg:(4W & 7W) MIURA(3-PW) :mizuno:(50/54/60) 

 

Awards, Achievements, and Accolades

Ha ha ha. That's so awesome. Im leaning towards the i25's I love the way they look and I feel like the S55's are a little above my ability level. What was it about the G25's that hated so much.
Awards, Achievements, and Accolades

Note: This thread is 3508 days old. We appreciate that you found this thread instead of starting a new one, but if you plan to post here please make sure it's still relevant. If not, please start a new topic. Thank you!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


×
×
  • Create New...

Important Information

Welcome to TST! Signing up is free, and you'll see fewer ads and can talk with fellow golf enthusiasts! By using TST, you agree to our Terms of Use, our Privacy Policy, and our Guidelines.

The popup will be closed in 10 seconds...