Jump to content
Check out the Spin Axis Podcast! ×
Note: This thread is 3338 days old. We appreciate that you found this thread instead of starting a new one, but if you plan to post here please make sure it's still relevant. If not, please start a new topic. Thank you!

Recommended Posts

Posted

I'm about to regrip my clubs with Golf Pride Tour Velvet grips. Sometimes I've added a layer of masking tape 4"-5" long at the top of the shaft just to get a hair thicker grip. But I can accomplish the same thing almost by "stacking" the grip when installing. My grips measure 10 5/8" inside length. I could mark the shafts 10 5/8" from the butt and make sure the grip is installed at that length. And I could stretch it past the mark for a thinner grip, or "stack" it short of the mark  for a thicker grip.

Does anyone mark their shafts for a certain and consistent grip size or am I just thinking too much? Thanks.


Posted

You're overthinking a tad.  Just use a layer of tape..

My philosophy on golf "We're not doing rocket science, here."


Posted

You're making it a bit complicated.  If you want to build up your grips, add extra layer(s) of tape.  Or just use a bigger grip!

Tour Edge Exotics XCG-V 10.5*
Tour Edge Exotics XCG-6 15*
Tour Edge Exotics XCG-6 #4

Callaway Razr X Tour 5-AW
Nike VR Pro Forged Brushed Oxide 54-58
Yes! C-Groove Sally-12M Mid Counterbalance


  • 3 years later...
Posted (edited)

Okay, thanks to another forum member, I am going to try my hand at installing new grips. I will be using Winn Dri-tecs over Hogan Legend Performance Graphite. To build them up, he suggests using some 1.88 inch Black Gorilla Tape. I do not have a substantial vice, so want to try and see if I can just clamp the shaft to a table top , I've a couple of those pistol clamps from Loew's. I also do not have an air compressor. I will need to remove the old grips (Avon Chamois), so I guess the best thing would be to slit them with box cutter, remove old adhesive with acetone or Goo Be Gone?. or, if I had any sense at all, just let Golf Smith do it.

Edited by Hacker James

"James"

:titleist: 913 D3 with Aldila RIP Phenom 60 4,2 Regular Shaft,  :touredge: Exotics XCG-7 Beta 3W with Matrix Red Tie Shaft:touredge: Exotics EX8 19 deg Hybrid w UST Mamiya Recoil F3 Shaft:touredge: Exotics EX9 28 deg Hybrid w UST Mamiya Recoil F3  shaft, / Bobby Jones Black 22 deg Hybrid:touredge: Exotics EXi 6 -PW  w UST Mamiya Recoil F2 Shaft, SW (56),GW (52),LW (60):touredge:  TGS),/ ODDYSEE Metal-X #7 customized putter (400G, cut down Mid Belly)

Awards, Achievements, and Accolades

Posted (edited)

Just a think outside the box moment.  Do you have a buddy that is a backyard mechanic?  Air compressor and blow gun with a bench vice are pretty basic tools for anyone who does more than change their own oil.  Mineral spirits and masking tape are as cheap as grip tape and solvent, and if you build it up too much or not enough it is just a quick blast of air, cut or put another wrap on, blow the same grip back on, with less cost or fuss.  Since I switched to this method I have regripped 6 different clubs with different layers of tape, went to the driving range and hit balls till I found the ideal grip build.  Then blow off all my grips, rewrap them all to spec, and put them all back on at only the cost of tape and time.

Edited by IndianaDundee

Posted

I will have to second IndianaDundee  Re-gripping is pretty easy,  I have re-gripped all my irons and have done a bunch of my friends ones as well.

Using the air compressor is the way to go.  No messy chemicals, easy on and easy off.  Biggest hint would be a hook blade for your razor knife so you don't damage your graphite shafts.  Just cut the rubber not the shaft!

The grips stay on for years, in the 90+ heat and the 40-cold.  I have even taken my red grips off one set of irons and put them on another a few times and they always stay on and come off easily.

To OP - I never marked any when installing.  Just push them and they stop when they are good.  You can stretch them but I didn't like how it looked or felt so I removed and put back on normal.  You can also not go on far enough and that feels strange so just push a little more and they are good.  I first bought a cheap grip and tried it on a junk club as I didn't want to wreck my good irons and put it on and off about 10 times.  After that I was like "Why pay someone to do this?  This is easy!"

  • Upvote 1

Driver: :callaway: Diablo
Woods: :callaway: Big Bertha 2 & 4
Irons: Miura MC 102's 3 - PW & Mizuno MP 67's 3 - W
Wedges: :mizuno: MP-R12 52* & 58*
Putters: :ping: WRX Ti4

Awards, Achievements, and Accolades

Posted
On October 30, 2016 at 0:38 PM, Hacker James said:

Okay, thanks to another forum member, I am going to try my hand at installing new grips. I will be using Winn Dri-tecs over Hogan Legend Performance Graphite. To build them up, he suggests using some 1.88 inch Black Gorilla Tape. I do not have a substantial vice, so want to try and see if I can just clamp the shaft to a table top , I've a couple of those pistol clamps from Loew's. I also do not have an air compressor. I will need to remove the old grips (Avon Chamois), so I guess the best thing would be to slit them with box cutter, remove old adhesive with acetone or Goo Be Gone?. or, if I had any sense at all, just let Golf Smith do it.

I've done hundreds of my own, and everyone is right, it's not hard at all...

...but, these days I let Golfsmith do it.  Buy their "club vantage" card for $50.  Included is labor for 28 regrips. Comes out to less than $2 a grip and no muss, no fuss.

  • Upvote 1

In David's bag....

Driver: Titleist 910 D-3;  9.5* Diamana Kai'li
3-Wood: Titleist 910F;  15* Diamana Kai'li
Hybrids: Titleist 910H 19* and 21* Diamana Kai'li
Irons: Titleist 695cb 5-Pw

Wedges: Scratch 51-11 TNC grind, Vokey SM-5's;  56-14 F grind and 60-11 K grind
Putter: Scotty Cameron Kombi S
Ball: ProV1

Awards, Achievements, and Accolades

  • Administrator
Posted

Install them yourself. Get PURE Grips.

Erik J. Barzeski —  I knock a ball. It goes in a gopher hole. 🏌🏼‍♂️
Director of Instruction Golf Evolution • Owner, The Sand Trap .com • AuthorLowest Score Wins
Golf Digest "Best Young Teachers in America" 2016-17 & "Best in State" 2017-20 • WNY Section PGA Teacher of the Year 2019 :edel: :true_linkswear:

Check Out: New Topics | TST Blog | Golf Terms | Instructional Content | Analyzr | LSW | Instructional Droplets

Awards, Achievements, and Accolades

Posted
1 hour ago, David in FL said:

I've done hundreds of my own, and everyone is right, it's not hard at all...

...but, these days I let Golfsmith do it.  Buy their "club vantage" card for $50.  Included is labor for 28 regrips. Comes out to less than $2 a grip and no muss, no fuss.

Just make sure before you purchase the Club Vantage card that the store will remain open after the sale bankruptcy sale  

Joe Paradiso

Awards, Achievements, and Accolades

Posted
53 minutes ago, iacas said:

Install them yourself. Get PURE Grips.

Is this what you are talking about? I've always wondered if that tool works good.

  • Upvote 1

- Shane

Awards, Achievements, and Accolades

Posted
6 minutes ago, CarlSpackler said:

Is this what you are talking about? I've always wondered if that tool works good.

The tool works great and it works with other rubber only grips as well.   

Joe Paradiso

Awards, Achievements, and Accolades

Posted
21 minutes ago, CarlSpackler said:

Is this what you are talking about?

P9.JPG

  • Upvote 1

Johnny Rocket - Let's Rock and Roll and play some golf !!!

Awards, Achievements, and Accolades

Posted (edited)
6 hours ago, Club Rat said:

P9.JPG

I tried the "this" link above to no avail. Still looking where to find this thing.  Never mind, I just did.

 

Edited by Hacker James

"James"

:titleist: 913 D3 with Aldila RIP Phenom 60 4,2 Regular Shaft,  :touredge: Exotics XCG-7 Beta 3W with Matrix Red Tie Shaft:touredge: Exotics EX8 19 deg Hybrid w UST Mamiya Recoil F3 Shaft:touredge: Exotics EX9 28 deg Hybrid w UST Mamiya Recoil F3  shaft, / Bobby Jones Black 22 deg Hybrid:touredge: Exotics EXi 6 -PW  w UST Mamiya Recoil F2 Shaft, SW (56),GW (52),LW (60):touredge:  TGS),/ ODDYSEE Metal-X #7 customized putter (400G, cut down Mid Belly)

Awards, Achievements, and Accolades

Posted

Below is a link to a review on Pure Grips from TST by  back in 2010.
Last summer/fall, Erik arranged a tour of Pure Grips for participants during the New Port Cup.
Everyone received the "Air Tool" gun for installing their products.
I've used it to remove grips of all types and brands.
I've also used the tool installing Pure Grips. It's a great system and many golf stores now utilize this product.

Pure Grips review

Johnny Rocket - Let's Rock and Roll and play some golf !!!

Awards, Achievements, and Accolades

  • Administrator
Posted

puregrips.com but the site is being renovated and will be back soon.

Erik J. Barzeski —  I knock a ball. It goes in a gopher hole. 🏌🏼‍♂️
Director of Instruction Golf Evolution • Owner, The Sand Trap .com • AuthorLowest Score Wins
Golf Digest "Best Young Teachers in America" 2016-17 & "Best in State" 2017-20 • WNY Section PGA Teacher of the Year 2019 :edel: :true_linkswear:

Check Out: New Topics | TST Blog | Golf Terms | Instructional Content | Analyzr | LSW | Instructional Droplets

Awards, Achievements, and Accolades

Posted

The Australia site is still active.

Pure Grips Australia

The installation video is a good reference to watch the application using the air tool.

Johnny Rocket - Let's Rock and Roll and play some golf !!!

Awards, Achievements, and Accolades

Posted
12 hours ago, Club Rat said:

Everyone received the "Air Tool" gun for installing their products.

You guys got a free air tool from them?  That's cool.  I had to make one.  I used a standard air nozzle and modified some components I had in my plumbing accessories.  Came out pretty good and I have used it more than 20 times.

Why would anyone do it the old fashion way anymore???

  • Upvote 1

Driver: :callaway: Diablo
Woods: :callaway: Big Bertha 2 & 4
Irons: Miura MC 102's 3 - PW & Mizuno MP 67's 3 - W
Wedges: :mizuno: MP-R12 52* & 58*
Putters: :ping: WRX Ti4

Awards, Achievements, and Accolades

Posted

I am going to start regripping too.  OP you can do it.  Now I have watched many videos and read ip on it.  This is the first time I ever heard of using an air compressor.  I am sure it's a super duper way to do it but I am going to do it the old fashioned way.    I have plenty of junk clubs to practice with.  Looks very simple. 


Note: This thread is 3338 days old. We appreciate that you found this thread instead of starting a new one, but if you plan to post here please make sure it's still relevant. If not, please start a new topic. Thank you!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Want to join this community?

    We'd love to have you!

    Sign Up
  • TST Partners

    PlayBetter
    Golfer's Journal
    ShotScope
    The Stack System
    FitForGolf
    FlightScope Mevo
    Direct: Mevo, Mevo+, and Pro Package.

    Coupon Codes (save 10-20%): "IACAS" for Mevo/Stack/FitForGolf, "IACASPLUS" for Mevo+/Pro Package, and "THESANDTRAP" for ShotScope. 15% off TourStriker (no code).
  • Posts

    • Day 1: 2025.12.26 Worked on LH position on grip, trying to keep fingers closer to perpendicular to the club. Feels awkward but change is meant to.
    • Please see this topic for updated information:
    • Please see this topic for updated information:
    • When you've been teaching golf as long as I have, you're going to find that you can teach some things better than you previously had, and you're probably going to find some things that you taught incorrectly. I don't see that as a bad thing — what would be worse is refusing to adapt and grow given new information. I've always said that my goal with my instruction isn't to be right, but it's to get things right. To that end, I'm about five years late in issuing a public proclamation on something… When I first got my GEARS system, I immediately looked at the golf swings of the dozens and dozens of Tour players for which I suddenly had full 3D data. I created a huge spreadsheet showing how their bodies moved, how the club moved, at various points in the swing. I mapped knee and elbow angles, hand speeds, shoulder turns and pelvis turns… etc. I re-considered what I thought I knew about the golf swing as performed by the best players. One of those things dated back to the earliest days: that you extend (I never taught "straighten" and would avoid using that word unless in the context of saying "don't fully straighten") the trail knee/leg in the backswing. I was mislead by 2D photos from less-than-ideal camera angles — the trail leg rotates a bit during the backswing, and so when observing trail knee flex should also use a camera that moves to stay perpendicular to the plane of the ankle/knee/hip joint. We have at least two topics here on this (here and here; both of which I'll be updating after publishing this) where @mvmac and I advise golfers to extend the trail knee. Learning that this was not right is one of the reasons I'm glad to have a 3D system, as most golfers generally preserve the trail knee flex throughout the backswing. Data Here's a video showing an iron and a driver of someone who has won the career slam: Here's what the graph of his right knee flex looks like. The solid lines I've positioned at the top of the backswing (GEARS aligns both swings at impact, the dashed line). Address is to the right, of course, and the graph shows knee flex from the two swings above. The data (17.56° and 23.20°) shows where this player is in both swings (orange being the yellow iron swing, pink the blue driver swing). You can see that this golfer extends his trail knee 2-3°… before bending it even more than that through the late backswing and early downswing. Months ago I created a quick Instagram video showing the trail knee flex in the backswing of several players (see the top for the larger number): Erik J. Barzeski (@iacas) • Instagram reel GEARS shares expert advice on golf swing technique, focusing on the critical backswing phase. Tour winners and major champions reveal the key to a precise and powerful swing, highlighting the importance of... Here are a few more graphs. Two LIV players and major champions: Two PGA Tour winners: Two women's #1 ranked players: Two more PGA Tour winners (one a major champ): Two former #1s, the left one being a woman, the right a man, with a driver: Two more PGA Tour players: You'll notice a trend: they almost all maintain roughly the same flex throughout their backswing and downswing. The Issues with Extending the Trail Knee You can play good golf extending (again, not "straightening") the trail knee. Some Tour players do. But, as with many things, if 95 out of 100 Tour players do it, you're most likely better off doing similarly to what they do. So, what are the issues with extending the trail knee in the backswing? To list a few: Pelvic Depth and Rotation Quality Suffers When the trail knee extends, the trail leg often acts like an axle on the backswing, with the pelvis rotating around the leg and the trail hip joint. This prevents the trail side from gaining depth, as is needed to keep the pelvis center from thrusting toward the ball. Most of the "early extension" (thrust) that I see occurs during the backswing. Encourages Early Extension (Thrust) Patterns When you've thrust and turned around the trail hip joint in the backswing, you often thrust a bit more in the downswing as the direction your pelvis is oriented is forward and "out" (to the right for a righty). Your trail leg can abduct to push you forward, but "forward" when your pelvis is turned like that is in the "thrust" direction. Additionally, the trail knee "breaking" again at the start of the downswing often jumps the trail hip out toward the ball a bit too much or too quickly. While the trail hip does move in that direction, if it's too fast or too much, it can prevent the lead side hip from getting "back" at the right rate, or at a rate commensurate with the trail hip to keep the pelvis center from thrusting. Disrupts the Pressure Shift/Transition When the trail leg extends too much, it often can't "push" forward normally. The forward push begins much earlier than forward motion begins — pushing forward begins as early as about P1.5 to P2 in the swings of most good golfers. It can push forward by abducting, again, but that's a weaker movement that shoves the pelvis forward (toward the target) and turns it more than it generally should (see the next point). Limits Internal Rotation of the Trail Hip Internal rotation of the trail hip is a sort of "limiter" on the backswing. I have seen many golfers on GEARS whose trail knee extends, whose pelvis shifts forward (toward the target), and who turn over 50°, 60°, and rarely but not never, over 70° in the backswing. If you turn 60° in the backswing, it's going to be almost impossible to get "open enough" in the downswing to arrive at a good impact position. Swaying/Lateral Motion Occasionally a golfer who extends the trail knee too much will shift back too far, but more often the issue is that the golfer will shift forward too early in the backswing (sometimes even immediately to begin the backswing), leaving them "stuck forward" to begin the downswing. They'll push forward, stop, and have to restart around P4, disrupting the smooth sequence often seen in the game's best players. Other Bits… Reduces ground reaction force potential, compromises spine inclination and posture, makes transition sequencing harder, increases stress on the trail knee and lower back… In short… It's not athletic. We don't do many athletic things with "straight" or very extended legs (unless it's the end of the action, like a jump or a big push off like a step in a running motion).
    • Day 135 12-25 Wide backswing to wide downswing drill. Recorder and used mirror. 
×
×
  • Create New...

Important Information

Welcome to TST! Signing up is free, and you'll see fewer ads and can talk with fellow golf enthusiasts! By using TST, you agree to our Terms of Use, our Privacy Policy, and our Guidelines.