Jump to content
Check out the Spin Axis Podcast! ×
Note: This thread is 3625 days old. We appreciate that you found this thread instead of starting a new one, but if you plan to post here please make sure it's still relevant. If not, please start a new topic. Thank you!

Recommended Posts

Posted
@billchao is correct. The riddle does NOT say it has to be equal number of heads UP.

Don

:titleist: 910 D2, 8.5˚, Adila RIP 60 S-Flex
:titleist: 980F 15˚
:yonex: EZone Blades (3-PW) Dynamic Gold S-200
:vokey:   Vokey wedges, 52˚; 56˚; and 60˚
:scotty_cameron:  2014 Scotty Cameron Select Newport 2

Awards, Achievements, and Accolades

  • Moderator
Posted

@billchao is correct. The riddle does NOT say it has to be equal number of heads UP.

It is what it says, but I think it's just either a typo or an oversight.

I'm pretty stumped on this one. Didn't @iacas say he thought he had it figured out?

Bill

“By three methods we may learn wisdom: First, by reflection, which is noblest; Second, by imitation, which is easiest; and third by experience, which is the bitterest.” - Confucius

My Swing Thread

Awards, Achievements, and Accolades

  • Administrator
Posted
You are given 99 coins that are heads up, and an unknown number of coins that are tails up. You are blindfolded and somehow can't feel the difference between the heads and tails sides of the coins. You can count the coins, put them in arbitrary many piles, flip whichever coins you want, but remember, when you flip and when you sort, you DO NOT know which ones are heads up, which are tails up. In the end, you must end up with just two piles, each containing an equal number of heads. How do you do this?

I struggled with this one for awhile but then I realized I was misreading it as saying "and an unknown number of coins that are heads or tails up." But it just says "tails up."

Duh. :doh:

And all we care about in the end is that the number that are heads up is the same - we don't care about how many are tails up in either of the piles. I also think people get confused by the number 99 being odd…

But anyway: since 99 coins are heads up, we have this:

Coin Side Number
Heads 99
Tails ???

You can do this in two moves, I believe.

First, pull out 99 coins into Pile B (we'll call the original pile Pile A).

Pile B will contain X heads up coins. This is the number, of the 99, that are heads up.

Pile A will contain 99 - X heads up coins. It started with 99, and we remove between 0 and 99 heads up coins.

Since we don't care at all about the tails, we can look at the heads up only, and we have:

Pile A Pile B
Before: 99 coins heads up Before: 0 coins heads up
After: 99-X coins heads up After: 99 coins, X heads up

For the heck of it, let's just say we took out 66 heads up coins. That means we also pulled out 33 tails up coins. That would make the tables look like this:

Pile A Pile B
99-66, leaving 33 coins heads up 66 heads up, 33 tails up

The red gives away the answer. Flip all 99 coins in Pile B. The number of tails up in Pile B equals the number of heads up that you started with (99) minus the number of heads up that you took away (i.e. what remains in Pile A).

It works for any number from 0 to 99. If you pull 99 coins over that are tails up, flip them all, they'll match the original 99 heads up coins that you somehow avoided getting into Pile B. If you pull all 99 coins that are heads up, you'll flip them all to tails up, and the number of heads will be 0.

If you pull 98 heads over, leaving one in Pile A, the one tails up coin will be converted. If you pull 1 heads over, leaving 98 in Pile A, the 98 tails that came with it will convert.

The only way this fails - because you can't create two piles using my method - is if there are ONLY 99 heads up coins and NO tails up coins to start… but even then you'll have 0 heads up.

Erik J. Barzeski —  I knock a ball. It goes in a gopher hole. 🏌🏼‍♂️
Director of Instruction Golf Evolution • Owner, The Sand Trap .com • AuthorLowest Score Wins
Golf Digest "Best Young Teachers in America" 2016-17 & "Best in State" 2017-20 • WNY Section PGA Teacher of the Year 2019 :edel: :true_linkswear:

Check Out: New Topics | TST Blog | Golf Terms | Instructional Content | Analyzr | LSW | Instructional Droplets

Awards, Achievements, and Accolades

Posted

Pull coins out of the pile till there are only 99 left, then flip those 99.

Mike


Titleist 905T 10.5°, 5W Golfsmith SuperSteel 17°, 4W MacGregor Tourney laminate 21°, 3-P MacGregor Colokrom M85 reissue, Snake Eyes 54° and 58° wedge, Odyssey Dual Force 330 blade

Awards, Achievements, and Accolades

  • Administrator
Posted
Pull coins out of the pile till there are only 99 left, then flip those 99.

That's kind of the opposite of my solution, but requires more work (because you have to count all of the coins first to know how many there are).

:-)

Erik J. Barzeski —  I knock a ball. It goes in a gopher hole. 🏌🏼‍♂️
Director of Instruction Golf Evolution • Owner, The Sand Trap .com • AuthorLowest Score Wins
Golf Digest "Best Young Teachers in America" 2016-17 & "Best in State" 2017-20 • WNY Section PGA Teacher of the Year 2019 :edel: :true_linkswear:

Check Out: New Topics | TST Blog | Golf Terms | Instructional Content | Analyzr | LSW | Instructional Droplets

Awards, Achievements, and Accolades

Posted

That's kind of the opposite of my solution, but requires more work (because you have to count all of the coins first to know how many there are).

It is your solution, just explained in a different way as your explanation confused me ... again :-) but these things happen. In the case of zero tails ends up with two piles with zero heads and one pile has zero coins as well.

Mike


Titleist 905T 10.5°, 5W Golfsmith SuperSteel 17°, 4W MacGregor Tourney laminate 21°, 3-P MacGregor Colokrom M85 reissue, Snake Eyes 54° and 58° wedge, Odyssey Dual Force 330 blade

Awards, Achievements, and Accolades

  • Administrator
Posted

Here's an old one:

A friend of yours is a big gambler. He decides one day to bet you everything you have for everything he has in a simple game. You're a gambler too so you go along.

The rules of the game are simple. You're each given identically sized poker chips and a flat, rectangular table on which to play. You'll alternate turns placing one poker chip down per turn, with the stipulation that the poker chip must rest completely flat on the table (no hanging over the edge, no overlapping other chips, no standing poker chips on their edges - you also can't move any poker chips once placed), and that you lose when you cannot make a legal play.

Your friend (stupidly) offers you the choice of deciding who makes the first move OR to pick the size of the table. He'll make the other choice.

Which do choice do you take, what do you choose, and why?

Erik J. Barzeski —  I knock a ball. It goes in a gopher hole. 🏌🏼‍♂️
Director of Instruction Golf Evolution • Owner, The Sand Trap .com • AuthorLowest Score Wins
Golf Digest "Best Young Teachers in America" 2016-17 & "Best in State" 2017-20 • WNY Section PGA Teacher of the Year 2019 :edel: :true_linkswear:

Check Out: New Topics | TST Blog | Golf Terms | Instructional Content | Analyzr | LSW | Instructional Droplets

Awards, Achievements, and Accolades

Posted
Here's an old one:

A friend of yours is a big gambler. He decides one day to bet you everything you have for everything he has in a simple game. You're a gambler too so you go along.

The rules of the game are simple. You're each given identically sized poker chips and a flat, rectangular table on which to play. You'll alternate turns placing one poker chip down per turn, with the stipulation that the poker chip must rest completely flat on the table (no hanging over the edge, no overlapping other chips, no standing poker chips on their edges - you also can't move any poker chips once placed), and that you lose when you cannot make a legal play.

Your friend (stupidly) offers you the choice of deciding who makes the first move OR to pick the size of the table. He'll make the other choice.

Which do choice do you take, what do you choose, and why?

Choose the table size? Then you can choose a table that will only fit two chips?

That was my first though, then I realized he could place it in the middle leaving me no move. Then I realized the answer would be to choose the table size and choose a table too small to legally place a chip.

I don't know if I'm right so I'll put my riddle in a spoiler:

A barrel of water weighs 20 lbs, what do you need to add to it to make it weigh 15 lbs?

Yours in earnest, Jason.
Call me Ernest, or EJ or Ernie.

PSA - "If you find yourself in a hole, STOP DIGGING!"

My Whackin' Sticks: :cleveland: 330cc 2003 Launcher 10.5*  :tmade: RBZ HL 3w  :nickent: 3DX DC 3H, 3DX RC 4H  :callaway: X-22 5-AW  :nike:SV tour 56* SW :mizuno: MP-T11 60* LW :bridgestone: customized TD-03 putter :tmade:Penta TP3   :aimpoint:

Awards, Achievements, and Accolades

Posted
[COLOR=FF0000]Choose the table size? Then you can choose a table that will only fit two chips?[/COLOR] That was my first though, then I realized he could place it in the middle leaving me no move. Then I realized the answer would be to choose the table size and choose a table too small to legally place a chip.

Then he would choose to let you go first.......

In David's bag....

Driver: Titleist 910 D-3;  9.5* Diamana Kai'li
3-Wood: Titleist 910F;  15* Diamana Kai'li
Hybrids: Titleist 910H 19* and 21* Diamana Kai'li
Irons: Titleist 695cb 5-Pw

Wedges: Scratch 51-11 TNC grind, Vokey SM-5's;  56-14 F grind and 60-11 K grind
Putter: Scotty Cameron Kombi S
Ball: ProV1

Awards, Achievements, and Accolades

Posted
I let him choose the table size, then technically I should be able to calculate how many moves are available and then choose to play first or second. I'm sure there is a trick answer but that is what I would do!

:adams: / :tmade: / :edel: / :aimpoint: / :ecco: / :bushnell: / :gamegolf: / 

Eyad

Awards, Achievements, and Accolades

Posted
Then he would choose to let you go first.......

oh

:doh:

Yours in earnest, Jason.
Call me Ernest, or EJ or Ernie.

PSA - "If you find yourself in a hole, STOP DIGGING!"

My Whackin' Sticks: :cleveland: 330cc 2003 Launcher 10.5*  :tmade: RBZ HL 3w  :nickent: 3DX DC 3H, 3DX RC 4H  :callaway: X-22 5-AW  :nike:SV tour 56* SW :mizuno: MP-T11 60* LW :bridgestone: customized TD-03 putter :tmade:Penta TP3   :aimpoint:

Awards, Achievements, and Accolades

  • Administrator
Posted

In order not to give anything away by giving any partial credit, I'll just say that nobody has given the fully correct answer yet.

I let him choose the table size, then technically I should be able to calculate how many moves are available and then choose to play first or second. I'm sure there is a trick answer but that is what I would do!

Specifically, that won't work because you can't force a certain spacing. Either player could put some chips right against other chips, while spacing some others almost a full poker chip size away.

Erik J. Barzeski —  I knock a ball. It goes in a gopher hole. 🏌🏼‍♂️
Director of Instruction Golf Evolution • Owner, The Sand Trap .com • AuthorLowest Score Wins
Golf Digest "Best Young Teachers in America" 2016-17 & "Best in State" 2017-20 • WNY Section PGA Teacher of the Year 2019 :edel: :true_linkswear:

Check Out: New Topics | TST Blog | Golf Terms | Instructional Content | Analyzr | LSW | Instructional Droplets

Awards, Achievements, and Accolades

Posted
In order not to give anything away by giving any partial credit, I'll just say that nobody has given the fully correct answer yet. Specifically, that won't work because you can't force a certain spacing. Either player could put some chips right against other chips, while spacing some others almost a full poker chip size away. [SPOILER=Answer to Ernest's Question][URL=http://thesandtrap.com/content/type/61/id/87822/] [/UR]

Yes, I agree... Then in that casei will pick the table size and make it so big that it will never take the amount of chips we have and that way no one wins and I keep my stuff... :) not fun i know!

:adams: / :tmade: / :edel: / :aimpoint: / :ecco: / :bushnell: / :gamegolf: / 

Eyad

Awards, Achievements, and Accolades

  • Administrator
Posted
Yes, I agree... Then in that casei will pick the table size and make it so big that it will never take the amount of chips we have and that way no one wins and I keep my stuff... :) not fun i know!

Uhhhh, no. You both have an infinite number of available chips.


Besides, you want his stuff, and you can guarantee getting it if you choose wisely.

Erik J. Barzeski —  I knock a ball. It goes in a gopher hole. 🏌🏼‍♂️
Director of Instruction Golf Evolution • Owner, The Sand Trap .com • AuthorLowest Score Wins
Golf Digest "Best Young Teachers in America" 2016-17 & "Best in State" 2017-20 • WNY Section PGA Teacher of the Year 2019 :edel: :true_linkswear:

Check Out: New Topics | TST Blog | Golf Terms | Instructional Content | Analyzr | LSW | Instructional Droplets

Awards, Achievements, and Accolades

Posted

Chose "who makes the first move" for the reason EJ said "oh", leaves you are holding all the cards.

If it's zero chip size he plays first, if it's two chip size you play first and play the middle to muck each end, if it is three chip size you play first and play the middle forcing him to play either end, other than that play first and when it gets to the last two or three squares make one of those plays.

Mike


Titleist 905T 10.5°, 5W Golfsmith SuperSteel 17°, 4W MacGregor Tourney laminate 21°, 3-P MacGregor Colokrom M85 reissue, Snake Eyes 54° and 58° wedge, Odyssey Dual Force 330 blade

Awards, Achievements, and Accolades

  • Administrator
Posted

If it's zero chip size he plays first, if it's two chip size you play first and play the middle to muck each end, if it is three chip size you play first and play the middle forcing him to play either end, other than that play first and when it gets to the last two or three squares make one of those plays.

I don't think you understood the question. Plus you don't know what size the table is unless you pick it. If you choose to decide who goes first, then your opponent gets to pick the table size.

Erik J. Barzeski —  I knock a ball. It goes in a gopher hole. 🏌🏼‍♂️
Director of Instruction Golf Evolution • Owner, The Sand Trap .com • AuthorLowest Score Wins
Golf Digest "Best Young Teachers in America" 2016-17 & "Best in State" 2017-20 • WNY Section PGA Teacher of the Year 2019 :edel: :true_linkswear:

Check Out: New Topics | TST Blog | Golf Terms | Instructional Content | Analyzr | LSW | Instructional Droplets

Awards, Achievements, and Accolades

Posted

Still working it.  but I have to pick table size.

1 - If I decide to go first, he will just make a table smaller than the chips.

2 - If I decide to go second, he will just make a table big enough for one

Again, my smart alec decision is "I'll pick the table size, I'll let you know as soon as you decide to move 1st or 2nd"

(I know this isn't the intent.)

So now to logic out the table size.......(I had to coin puzzle figured out last night.....too late to get it in here.  once figured out that the piles can be different sizes and we don't care if the tails are equal or not it just became a matter of figuring out how to trade equal numbers of flips - works easy by starting with smaller number assumptions)

actually - as long as I have his info first, I don't much care which criteria I get to constrain

Bill - 

Awards, Achievements, and Accolades

  • Administrator
Posted
Guys these are tables and poker chips. A table that couldn't even fit two poker chips is not a table. I don't know what it is but it's not a table. It's a normal table. I don't care if it's a small coffee table or a banquet table that seats 100 people. It's a "table."

Erik J. Barzeski —  I knock a ball. It goes in a gopher hole. 🏌🏼‍♂️
Director of Instruction Golf Evolution • Owner, The Sand Trap .com • AuthorLowest Score Wins
Golf Digest "Best Young Teachers in America" 2016-17 & "Best in State" 2017-20 • WNY Section PGA Teacher of the Year 2019 :edel: :true_linkswear:

Check Out: New Topics | TST Blog | Golf Terms | Instructional Content | Analyzr | LSW | Instructional Droplets

Awards, Achievements, and Accolades

Note: This thread is 3625 days old. We appreciate that you found this thread instead of starting a new one, but if you plan to post here please make sure it's still relevant. If not, please start a new topic. Thank you!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Want to join this community?

    We'd love to have you!

    Sign Up
  • TST Partners

    PlayBetter
    Golfer's Journal
    ShotScope
    The Stack System
    FitForGolf
    FlightScope Mevo
    Direct: Mevo, Mevo+, and Pro Package.

    Coupon Codes (save 10-20%): "IACAS" for Mevo/Stack/FitForGolf, "IACASPLUS" for Mevo+/Pro Package, and "THESANDTRAP" for ShotScope. 15% off TourStriker (no code).
  • Posts

    • Day 1: 2025.12.26 Worked on LH position on grip, trying to keep fingers closer to perpendicular to the club. Feels awkward but change is meant to.
    • Please see this topic for updated information:
    • Please see this topic for updated information:
    • When you've been teaching golf as long as I have, you're going to find that you can teach some things better than you previously had, and you're probably going to find some things that you taught incorrectly. I don't see that as a bad thing — what would be worse is refusing to adapt and grow given new information. I've always said that my goal with my instruction isn't to be right, but it's to get things right. To that end, I'm about five years late in issuing a public proclamation on something… When I first got my GEARS system, I immediately looked at the golf swings of the dozens and dozens of Tour players for which I suddenly had full 3D data. I created a huge spreadsheet showing how their bodies moved, how the club moved, at various points in the swing. I mapped knee and elbow angles, hand speeds, shoulder turns and pelvis turns… etc. I re-considered what I thought I knew about the golf swing as performed by the best players. One of those things dated back to the earliest days: that you extend (I never taught "straighten" and would avoid using that word unless in the context of saying "don't fully straighten") the trail knee/leg in the backswing. I was mislead by 2D photos from less-than-ideal camera angles — the trail leg rotates a bit during the backswing, and so when observing trail knee flex should also use a camera that moves to stay perpendicular to the plane of the ankle/knee/hip joint. We have at least two topics here on this (here and here; both of which I'll be updating after publishing this) where @mvmac and I advise golfers to extend the trail knee. Learning that this was not right is one of the reasons I'm glad to have a 3D system, as most golfers generally preserve the trail knee flex throughout the backswing. Data Here's a video showing an iron and a driver of someone who has won the career slam: Here's what the graph of his right knee flex looks like. The solid lines I've positioned at the top of the backswing (GEARS aligns both swings at impact, the dashed line). Address is to the right, of course, and the graph shows knee flex from the two swings above. The data (17.56° and 23.20°) shows where this player is in both swings (orange being the yellow iron swing, pink the blue driver swing). You can see that this golfer extends his trail knee 2-3°… before bending it even more than that through the late backswing and early downswing. Months ago I created a quick Instagram video showing the trail knee flex in the backswing of several players (see the top for the larger number): Erik J. Barzeski (@iacas) • Instagram reel GEARS shares expert advice on golf swing technique, focusing on the critical backswing phase. Tour winners and major champions reveal the key to a precise and powerful swing, highlighting the importance of... Here are a few more graphs. Two LIV players and major champions: Two PGA Tour winners: Two women's #1 ranked players: Two more PGA Tour winners (one a major champ): Two former #1s, the left one being a woman, the right a man, with a driver: Two more PGA Tour players: You'll notice a trend: they almost all maintain roughly the same flex throughout their backswing and downswing. The Issues with Extending the Trail Knee You can play good golf extending (again, not "straightening") the trail knee. Some Tour players do. But, as with many things, if 95 out of 100 Tour players do it, you're most likely better off doing similarly to what they do. So, what are the issues with extending the trail knee in the backswing? To list a few: Pelvic Depth and Rotation Quality Suffers When the trail knee extends, the trail leg often acts like an axle on the backswing, with the pelvis rotating around the leg and the trail hip joint. This prevents the trail side from gaining depth, as is needed to keep the pelvis center from thrusting toward the ball. Most of the "early extension" (thrust) that I see occurs during the backswing. Encourages Early Extension (Thrust) Patterns When you've thrust and turned around the trail hip joint in the backswing, you often thrust a bit more in the downswing as the direction your pelvis is oriented is forward and "out" (to the right for a righty). Your trail leg can abduct to push you forward, but "forward" when your pelvis is turned like that is in the "thrust" direction. Additionally, the trail knee "breaking" again at the start of the downswing often jumps the trail hip out toward the ball a bit too much or too quickly. While the trail hip does move in that direction, if it's too fast or too much, it can prevent the lead side hip from getting "back" at the right rate, or at a rate commensurate with the trail hip to keep the pelvis center from thrusting. Disrupts the Pressure Shift/Transition When the trail leg extends too much, it often can't "push" forward normally. The forward push begins much earlier than forward motion begins — pushing forward begins as early as about P1.5 to P2 in the swings of most good golfers. It can push forward by abducting, again, but that's a weaker movement that shoves the pelvis forward (toward the target) and turns it more than it generally should (see the next point). Limits Internal Rotation of the Trail Hip Internal rotation of the trail hip is a sort of "limiter" on the backswing. I have seen many golfers on GEARS whose trail knee extends, whose pelvis shifts forward (toward the target), and who turn over 50°, 60°, and rarely but not never, over 70° in the backswing. If you turn 60° in the backswing, it's going to be almost impossible to get "open enough" in the downswing to arrive at a good impact position. Swaying/Lateral Motion Occasionally a golfer who extends the trail knee too much will shift back too far, but more often the issue is that the golfer will shift forward too early in the backswing (sometimes even immediately to begin the backswing), leaving them "stuck forward" to begin the downswing. They'll push forward, stop, and have to restart around P4, disrupting the smooth sequence often seen in the game's best players. Other Bits… Reduces ground reaction force potential, compromises spine inclination and posture, makes transition sequencing harder, increases stress on the trail knee and lower back… In short… It's not athletic. We don't do many athletic things with "straight" or very extended legs (unless it's the end of the action, like a jump or a big push off like a step in a running motion).
    • Day 135 12-25 Wide backswing to wide downswing drill. Recorder and used mirror. 
×
×
  • Create New...

Important Information

Welcome to TST! Signing up is free, and you'll see fewer ads and can talk with fellow golf enthusiasts! By using TST, you agree to our Terms of Use, our Privacy Policy, and our Guidelines.