Jump to content
Check out the Spin Axis Podcast! ×
IGNORED

Do you still use a 3-iron?


Note: This thread is 3649 days old. We appreciate that you found this thread instead of starting a new one, but if you plan to post here please make sure it's still relevant. If not, please start a new topic. Thank you!

Do you still use a 3-iron?  

58 members have voted

  1. 1. Do you still use a 3-iron?

    • Yes
      22
    • No
      27
    • Sometimes
      9


Recommended Posts

Posted

How many of you still use a 3 iron. If you don't use one any longer, what have you replaced it with?

Awards, Achievements, and Accolades

Posted

I still use mine. See my signature. It's my 230 club. Or windy day club as it has a lower trajectory. 

Don

:titleist: 910 D2, 8.5˚, Adila RIP 60 S-Flex
:titleist: 980F 15˚
:yonex: EZone Blades (3-PW) Dynamic Gold S-200
:vokey:   Vokey wedges, 52˚; 56˚; and 60˚
:scotty_cameron:  2014 Scotty Cameron Select Newport 2

Awards, Achievements, and Accolades

Posted

a n3 hybride, it's 19° and about a 2 iron equivalent.

then I have a 4 iron of 24°, small gap but at 200-220 I looking for straight more that distance precision.

 


  • Administrator
Posted

I do, but that's mostly because hybrids tend to launch the ball too high.

I rarely use it, though, as I rarely face the shot it requires. And no, I don't need to add another wedge or anything, either. :-) 

Erik J. Barzeski —  I knock a ball. It goes in a gopher hole. 🏌🏼‍♂️
Director of Instruction Golf Evolution • Owner, The Sand Trap .com • AuthorLowest Score Wins
Golf Digest "Best Young Teachers in America" 2016-17 & "Best in State" 2017-20 • WNY Section PGA Teacher of the Year 2019 :edel: :true_linkswear:

Check Out: New Topics | TST Blog | Golf Terms | Instructional Content | Analyzr | LSW | Instructional Droplets

Awards, Achievements, and Accolades

Posted

I still use mine a lot.  Like @iacas I find the hybrids launch too high most of the time and I don't want to have to hit a bit of a knockdown every shot just to get a 'normal' ball flight.  I can still launch my 3i over 30yds peak height so I'm not too worried about it either way just yet.

Brad


Posted
3 hours ago, 9wood said:

How many of you still use a 3 iron. If you don't use one any longer, what have you replaced it with?

I last had a 3 iron more than 15 years ago.  20 years ago I also carried and used a 2 iron.  Now my longest is a 4 iron, then I have a 7 wood and 5 wood - no hybrids.

Of course my 4 iron today is at least as strongly lofted as my 3 iron back in the day.

Rick

"He who has the fastest cart will never have a bad lie."

Awards, Achievements, and Accolades

Posted
4 hours ago, 9wood said:

How many of you still use a 3 iron. If you don't use one any longer, what have you replaced it with?

It's been quite a while since I've had a 3 iron in my bag. Pretty much as soon as hybrids were introduced, I made the switch. The first hybrid I ever had was the original TaylorMade Rescue, back when their color scheme was still that awful burner orange. I recall that first one having 19 degrees loft, and I made a hole-in-one with it about a month after I got it. The hole was 206 yards, and I was sold on hybrids after that.

I carry 2 hybrids now (20 and 23 degree), both are the Adams A12 Pro's.

Awards, Achievements, and Accolades

  • Moderator
Posted

I voted Yes. I used the i E1 3-iron for a few months this year and really liked it. It went high enough and I could hit it super low if I needed to. Before that I had G30 4-iron which was the loft of a 3-iron and currently doing the same thing with a GMax 4-iron. I think I may prefer the i 3-iron because I just hit better shots with it.

Mike McLoughlin

Check out my friends on Evolvr!
Follow The Sand Trap on Twitter!  and on Facebook
Golf Terminology -  Analyzr  -  My FacebookTwitter and Instagram 

Awards, Achievements, and Accolades

Posted

I seem to launch all my irons quite high, so ball flight is not a problem, as long as I keep my head down and avoid topping the ball. I use a long iron (sometimes 3 iron, more often 2 iron) almost exclusively for my second shot on par 5's or sometimes on longer par 3's. I have never found a hybrid or fairway wood I can hit consistently, but generally do not have a problem with the irons - at any rate: it's not the weakest part of my game!


Posted

I still use a #3 iron when I still have a good distance to go from the fairway. It also comes in handy on windy days when I don't want to hit a high trajectory shot. One other use for the 3 iron is when there are over-hanging tree branches and I need to keep my ball flight low to avoid the tree limbs. I use to have a #1 driving iron but could never hit that thing so it had to go.

Awards, Achievements, and Accolades

Posted

I have always played a 3i., and I never had any issues with it. I hit it about as well as any of my other mid/long irons, as long as I have a decent lie, or off of a tee. I love the sight and feel of a smoothed 3i. Although, you really have to get it moving to hit it out of even moderate rough. Anything thick or deep, gotta hit more loft.

dak4n6


Posted

Not normally. The way I hit the ball (or don't hit the ball), I skip from 5I straight to 5W. I only use 3I for punch shots under branches or odd situations where I'm very afraid of a slice.

Awards, Achievements, and Accolades

Posted

I used to switch it out depending on the day (whether or not it was windy), but I've been debating recently whether I should put it in the bag full-time over my hybrid. I hit it approximately the same distance (it's about 5-10 yards shorter, off the deck/off the tee), but it gives me the versatility of being able to hit it much lower than I can hit the hybrid. I also have the additional issue of slightly less control with the hybrid simply due to the longer shaft. I like the hybrid since it has more forgiveness for mishits, but I can't hit anything but a draw (with a more common miss than I;d like of a hook) with it, while my 3-iron is much more controllable.

My ballstriking has been solid enough that I plan to place the 3-iron in my bag for my next couple of rounds and see what the results are. I predict the only downside being a slightly lesser chance of reaching a par 5 in two since I also, unfortunately, have troubles with my 3-wood off of the ground. I don't predict it to overly affect my score though, just because I can hit my 3-iron very nearly as far as my 3-hybrid anyways with the greater versatility. 

Awards, Achievements, and Accolades

Posted

If you count my 20 degree 4 iron as a 2 iron, I still use one. In 1984, the Titleist 2 iron was 20 degrees of loft. Now they make 4 irons with 20 degrees of loft. 5 irons have the same loft as 3 irons used to. 

Julia

:callaway:  :cobra:    :seemore:  :bushnell:  :clicgear:  :adidas:  :footjoy:

Spoiler

Driver: Callaway Big Bertha w/ Fubuki Z50 R 44.5"
FW: Cobra BiO CELL 14.5 degree; 
Hybrids: Cobra BiO CELL 22.5 degree Project X R-flex
Irons: Cobra BiO CELL 5 - GW Project X R-Flex
Wedges: Cobra BiO CELL SW, Fly-Z LW, 64* Callaway PM Grind.
Putter: 48" Odyssey Dart

Awards, Achievements, and Accolades

Posted

Four years ago, I carried a 3i and used it strictly as a driving iron on tighter holes. It was a Callaway X20 Tour with PX 5.0 Rifle Flighted shaft.

I charted holes where I used it off the tee - mostly par 4s - and I parred 80% of them.

Following that year, I switched out of 3W, and 5W (or variant) and went to 4W and 7W, and found some hybrids I liked. I used a 4H instead of a 3i.

Last season, I reshafted my X20 Tours with lighter shafts, and also picked up a set of SLDR irons. The SLDRs, with their ThruSlot on 3i through 7i launch the ball well on the longer irons. The SLDR 4i (21* - same loft as my old X20 3i) proved to be an excellent driving iron for tee shots. But, the hybrid is more reliable off the fairway,

The 7W and 3H went the same distance. The difference - 7W better in summer to get ball out of medium rough // 3H better Nov-Feb when rough is sparse and the winds are high.

-------------------------------
For those who are marginal in their success with 3 irons, a suggestion: Get your 3i (and probably your 4i) softstepped. To do this, you would put a shaft tipped for 2i into 3i, and move the 3i shaft to 4i. That way, you lengthen the flexible part of the shaft and get a better launch on the ball. Or, if you have steel shafts, you could put a graphite shaft into the 3i and improve the launch.

Focus, connect and follow through!

  • Completed KBS Education Seminar (online, 2015)
  • GolfWorks Clubmaking AcademyFitting, Assembly & Repair School (2012)

Driver:  :touredge: EXS 10.5°, weights neutral   ||  FWs:  :callaway: Rogue 4W + 7W
Hybrid:  :callaway: Big Bertha OS 4H at 22°  ||  Irons:  :callaway: Mavrik MAX 5i-PW
Wedges:  :callaway: MD3: 48°, 54°... MD4: 58° ||  Putter:image.png.b6c3447dddf0df25e482bf21abf775ae.pngInertial NM SL-583F, 34"  
Ball:  image.png.f0ca9194546a61407ba38502672e5ecf.png QStar Tour - Divide  ||  Bag: :sunmountain: Three 5 stand bag

Awards, Achievements, and Accolades

Posted
On 12/4/2015, 1:11:20, 9wood said:

How many of you still use a 3 iron. If you don't use one any longer, what have you replaced it with?

Sometimes, when I want to torture myself I play with blades and steel shafted clubs.

In my scoring set of clubs, I replaced the 3i with a 20 degree hybrid which is pretty much bombproof compared to the 3i.

:ping:  :tmade:  :callaway:   :gamegolf:  :titleist:

TM White Smoke Big Fontana; Pro-V1
TM Rac 60 TT WS, MD2 56
Ping i20 irons U-4, CFS300
Callaway XR16 9 degree Fujikura Speeder 565 S
Callaway XR16 3W 15 degree Fujikura Speeder 565 S, X2Hot Pro 20 degrees S

"I'm hitting the woods just great, but I'm having a terrible time getting out of them." ~Harry Toscano

Awards, Achievements, and Accolades

Posted

I switch it in and out with a 19 hybrid.   The 3-iron is good for firmer conditions for me because I feel like I get more roll if I hit it off a tee. 

It also largely depends on where I am off the tee.  My home course has a lot of angles and trouble and 3/4 irons off tees are good options.   If I need more distance or feel like my swing isn't where it should I tend towards the hybrid.  If I am striking my irons well I use the 3-iron and use it off several tees.   There is less dispersion, I find, with the 3-iron vs the hybrid.   However I can hit par 5s in two easier with the hybrid since it comes in higher. 

—Adam

 

Awards, Achievements, and Accolades

Posted
5 hours ago, DrvFrShow said:

If you count my 20 degree 4 iron as a 2 iron, I still use one. In 1984, the Titleist 2 iron was 20 degrees of loft. Now they make 4 irons with 20 degrees of loft. 5 irons have the same loft as 3 irons used to. 

My current 4 iron is 19°.  No idea what loft the 2 iron I had back in 1989 was.

Rick

"He who has the fastest cart will never have a bad lie."

Awards, Achievements, and Accolades

Note: This thread is 3649 days old. We appreciate that you found this thread instead of starting a new one, but if you plan to post here please make sure it's still relevant. If not, please start a new topic. Thank you!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Want to join this community?

    We'd love to have you!

    Sign Up
  • TST Partners

    PlayBetter
    Golfer's Journal
    ShotScope
    The Stack System
    FitForGolf
    FlightScope Mevo
    Direct: Mevo, Mevo+, and Pro Package.

    Coupon Codes (save 10-20%): "IACAS" for Mevo/Stack/FitForGolf, "IACASPLUS" for Mevo+/Pro Package, and "THESANDTRAP" for ShotScope. 15% off TourStriker (no code).
  • Posts

    • Wordle 1,639 4/6 🟩⬜⬜⬜⬜ 🟩⬜🟨🟨⬜ 🟩⬜🟩🟩⬜ 🟩🟩🟩🟩🟩
    • You can try it with some lead tape first to see if it works for you.
    • Wordle 1,639 5/6 🟨⬜⬜⬜⬜ 🟨⬜🟩🟨⬜ 🟩🟨🟩⬜⬜ 🟩⬜🟩🟩🟩 🟩🟩🟩🟩🟩
    • I am currently playing a Cobra Ltdx LS 9 degree driver and Cobra Ltdx LS FW3. Both with Tensei White stock stiff shafts and original weights of 12g (heel) and 3g (toe). My miss is usually a pull fade or sometimes a slice, swing is out to in. Driver swing speed about 112 mph. Grips are stock regular. Intended change: Driver: Switching to Tensei White x-flex one inch shorter which I suppose would be 44,5? Changing heel weight to 18g. Changing grip to Golf Pride Z-grip cord midsize. Change hosel setting to standard draw. FW3: Changing heel weight to 16g (apparently not available in FW weights, but supposed to be something called "internal weight" a club builder can add which fits between the weight and the screw?). Change grip to Golf Pride Z-grip cord midsize. Changing hosel setting to standard +1. The goal is to 1) get better grip since I tend so lose grip in warm and moist conditions with the current grips and 2) mitigate the misses to start more straight with less side spin. Also considering adding the Cobra Ltdx LS FW5 instead of my old Taylormade R9 and getting 14g heel and 6g toe weights with the same grip as the others and hosel setting standard +1.   All of the above is based on conversations with ChatGPT and, as everyone knows, it can come up with pretty much whatever but I spent a few hours asking about different perspectives etc and this was the recommendation. So, my question is basically, does it make any sense?   Thanks.
    • Wordle 1,639 4/6* ⬜⬜🟩🟩⬜ 🟩⬜🟩🟩⬜ 🟩⬜🟩🟩⬜ 🟩🟩🟩🟩🟩
×
×
  • Create New...

Important Information

Welcome to TST! Signing up is free, and you'll see fewer ads and can talk with fellow golf enthusiasts! By using TST, you agree to our Terms of Use, our Privacy Policy, and our Guidelines.