Jump to content
Note: This thread is 2935 days old. We appreciate that you found this thread instead of starting a new one, but if you plan to post here please make sure it's still relevant. If not, please start a new topic. Thank you!

Recommended Posts

Creating a golf chip and putt area in my backyard

Hi there.  First time posting. Long time lurker. Love this site. 

I have about 3/4 of an acre I want to convert into a golf short game area. It currently has some undulations (which is close to what I want for my golf area) and is covered with barnyard grass, fescue grass and broadleaf weeds. The ground also feels like it has a lot of bumps when I walk on it. I live in Michigan and I talked with a local golf course super and he recommended that I just go with perennial rye grass for everything (green, fringe, and rough).

My question is, what is the best way for me to convert what I have to what I want? My priorities are cost and time. I want a good value and I don't want it to be a huge project. I have a full size John Deere 2030 tractor with a brush hog and a scraping blade. I plan on getting a utv. I am willing to rent or buy additional attachments for both for this project. I also have a zero turn mower. I think I will get a push mower for the greens(the special low cut green mower). I am hoping I can use the same push mower for the fringe (if it can cut that high). And then use my zero turn for the rough.

My thinking is, I don't want to Roundup everything. The ground will then take forever for it to be ready to accept the rye grass seeds(it will have to wait for the Roundup to fade). Could take 3 to 6 months and then I have to deal with bare dirt for a long time. I was thinking I would aerate what I have now, then roll the grass to even out the bumps. Then use the special green mower to cut the existing grass super low. Hopefully the existing grass dies, then I just seed with my ryegrass. Will that work? Let me know what you guys think is the best way to go about this. Much appreciated in advance!

Best,

Mike from Michigan


  • Moderator
On 5/11/2016 at 0:47 AM, lonemedic said:
Creating a golf chip and putt area in my backyard
Hi there.  First time posting. Long time lurker. Love this site. 
I have about 3/4 of an acre I want to convert into a golf short game area. It currently has some undulations (which is close to what I want for my golf area) and is covered with barnyard grass, fescue grass and broadleaf weeds. The ground also feels like it has a lot of bumps when I walk on it. I live in Michigan and I talked with a local golf course super and he recommended that I just go with perennial rye grass for everything (green, fringe, and rough).
My question is, what is the best way for me to convert what I have to what I want? My priorities are cost and time. I want a good value and I don't want it to be a huge project. I have a full size John Deere 2030 tractor with a brush hog and a scraping blade. I plan on getting a utv. I am willing to rent or buy additional attachments for both for this project. I also have a zero turn mower. I think I will get a push mower for the greens(the special low cut green mower). I am hoping I can use the same push mower for the fringe (if it can cut that high). And then use my zero turn for the rough.
My thinking is, I don't want to Roundup everything. The ground will then take forever for it to be ready to accept the rye grass seeds(it will have to wait for the Roundup to fade). Could take 3 to 6 months and then I have to deal with bare dirt for a long time. I was thinking I would aerate what I have now, then roll the grass to even out the bumps. Then use the special green mower to cut the existing grass super low. Hopefully the existing grass dies, then I just seed with my ryegrass. Will that work? Let me know what you guys think is the best way to go about this. Much appreciated in advance!
Best,
 Mike from Michigan

Welcome to the Sand Trap. I'm not sure if many of the Sand Trap members have done this. I would recommend what the course folks said in terms of grass. The other thing I would add is a bunker. Unless you wanted to build a green, you maybe better off making a smaller one with regular grass and just cut it short. 

For the rest of the area, I would start with cutting it short and just use it as is for simulating rough. The type of grass/weeds you describe would be a good simulation of different types of rough. Keep it a bit long, 3 to 4" too.

Scott

Titleist, Edel, Scotty Cameron Putter, Snell - AimPoint - Evolvr - MirrorVision

My Swing Thread

boogielicious - Adjective describing the perfect surf wave

Awards, Achievements, and Accolades

41 minutes ago, boogielicious said:

For the rest of the area, I would start with cutting it short and just use it as is for simulating rough. The type of grass/weeds you describe would be a good simulation of different types of rough. Keep it a bit long, 3 to 4" too.

I would agree about not worrying too much about the quality of the grass in general - for myself having a perfect lie every time wouldn't be as useful as getting some random variations.  That at least is what I get mostly out on the course!  And a sand pit is a great idea plus maybe adding some 2-5' mounds so you can practice upslope/downslope etc - that might be as simple as dumping a ton of soil in a pile and then compacting it down and covering with seed.

Having a 'green' would be useful I think to practice watching the ball run out.  I chip in my backyard which is fine until the ball hits the grass but then it tends to stop rolling more quickly than it would on a green.  Perfectly manicured grass is an option but I've often thought that an artificial surface or even compacted sand / earth might work - probably depends on your climate and might not work in Michigan.  If you want to practice putting then this obviously might not be ideal but for me I would just be interested in chipping because I don't think I could maintain a green to a high enough standard to make putting close enough to the real thing.

Adam

:ping: G30 Driver 

:callaway: XR16 3W
:callaway: Big Bertha 5W
:ping: S55 4-W 
:ping: 50' , 56', 60' Glide Wedge
:odyssey: White Hot #7 Putter


If it were me, I would build a green, add a bunker, or two, and just leave the rest as it is. Of course, I would cut some of the "rest" to a usable height. 

I would add grass seed to the whole area. Over time it should mix well with the existing grass/weeds. Maybe add some fertilizer to help thicken everything up. 

Maybe add some sod to a few areas, as hitting stations. 

Something else you might want to explore is a DIY, no/low maintenance, synthetic green. This would be handy if, at a later date, you want to change how your green plays. Another plus is your stimp would mimic more closely what you might see when go to a real course. I had a green in my back yard, and over time I got to where I'd miss very few putts since I was so familiar with it. I'd roll up parts of it, add material, to make the gree roll differently. Just make sure you have proper drainage for it. 

And of course you might want to add a full swing, longer club, practice net area. You have plenty of room. 

I am assuming irrigation for the area has been already taken care of. 

In My Bag:
A whole bunch of Tour Edge golf stuff...... :beer:

Awards, Achievements, and Accolades

Thanks for your responses everyone.  

I think I am way over my head if I have to mow it everyday. I was thinking twice a week.  I like the idea of using a synthetic green if this is the case. Then just keep what I have surrounding it.  That way, I dont even have to get a special mower just for the green.  

Yes, I will definitely add a bunker or 2.

Thanks for helping me work this out.  


  • Moderator
1 hour ago, lonemedic said:

Thanks for your responses everyone.  

I think I am way over my head if I have to mow it everyday. I was thinking twice a week.  I like the idea of using a synthetic green if this is the case. Then just keep what I have surrounding it.  That way, I dont even have to get a special mower just for the green.  

Yes, I will definitely add a bunker or 2.

Thanks for helping me work this out.  

We want pictures of course!!!:-)

Scott

Titleist, Edel, Scotty Cameron Putter, Snell - AimPoint - Evolvr - MirrorVision

My Swing Thread

boogielicious - Adjective describing the perfect surf wave

Awards, Achievements, and Accolades

  • 2 months later...

Here's a short-game area I prepped for partial wedges and chips:

YardRangeTST.jpg

 

  • Upvote 2

Focus, connect and follow through!

  • Completed KBS Education Seminar (online, 2015)
  • GolfWorks Clubmaking AcademyFitting, Assembly & Repair School (2012)

Driver:  :touredge: EXS 10.5°, weights neutral   ||  FWs:  :callaway: Rogue 4W + 7W
Hybrid:  :callaway: Big Bertha OS 4H at 22°  ||  Irons:  :callaway: Mavrik MAX 5i-PW
Wedges:  :callaway: MD3: 48°, 54°... MD4: 58° ||  Putter:image.png.b6c3447dddf0df25e482bf21abf775ae.pngInertial NM SL-583F, 34"  
Ball:  image.png.f0ca9194546a61407ba38502672e5ecf.png QStar Tour - Divide  ||  Bag: :sunmountain: Three 5 stand bag

Awards, Achievements, and Accolades

  • 1 month later...
On 7/22/2016 at 4:21 PM, WUTiger said:

Here's a short-game area I prepped for partial wedges and chips:

YardRangeTST.jpg

 

Gonzo like it!  I've a little bit similar in "Improved Practice Area"

"James"

:titleist: 913 D3 with Aldila RIP Phenom 60 4,2 Regular Shaft,  :touredge: Exotics XCG-7 Beta 3W with Matrix Red Tie Shaft:touredge: Exotics EX8 19 deg Hybrid w UST Mamiya Recoil F3 Shaft:touredge: Exotics EX9 28 deg Hybrid w UST Mamiya Recoil F3  shaft, / Bobby Jones Black 22 deg Hybrid:touredge: Exotics EXi 6 -PW  w UST Mamiya Recoil F2 Shaft, SW (56),GW (52),LW (60):touredge:  TGS),/ ODDYSEE Metal-X #7 customized putter (400G, cut down Mid Belly)

Awards, Achievements, and Accolades

  • 2 months later...
(edited)

Anyone have experience playing on Tour Green or other artificial putting/chipping green surfaces?

I am considering the same thing as you, but am leaning towards using a large artificial green/fringe with multiple holes and artificial tee boxes from different approach distances and angles...maybe even a sandtrap or two.

Seems like low maintenance would give me more time to just practice.

Something like this but with multiple flags and tee boxes. Image stolen from Internet, not mine.

image22717.jpg

Edited by Joey G

:ping:   Ping G30 - Driver       

Ping G Series - 3w & 5w 

Ping G5 - 7w & 5-PW

Ping Glide 2.0 Stealth 52*, 56*, 60*

Ping Sigma 2 Fetch putter

Awards, Achievements, and Accolades

 

20161112_233911.png

Like this, with a couple of additional boxes. Just looking for feedback on the playing surfaces by Tour Greens.

:ping:   Ping G30 - Driver       

Ping G Series - 3w & 5w 

Ping G5 - 7w & 5-PW

Ping Glide 2.0 Stealth 52*, 56*, 60*

Ping Sigma 2 Fetch putter

Awards, Achievements, and Accolades

Depending on what is underneath the synthetic surfaces I've found that they can sometimes be "bouncy", in that a golf ball will behave as though the green was ultra firm (because it is if they compact the sand too tightly underneath it or if it's installed with minimal padding over concrete). Biggest factor I'd be concerned about would be the quality and durability of the hitting surface.

The top setup looks like a broken window waiting to happen if someone tried to flop it and bladed it instead.

  • Upvote 1
Awards, Achievements, and Accolades

  • Administrator

Any of the companies can do something outdoors. I recommend you check out SynLawn in particular.

  • Upvote 1

Erik J. Barzeski —  I knock a ball. It goes in a gopher hole. 🏌🏼‍♂️
Director of Instruction Golf Evolution • Owner, The Sand Trap .com • AuthorLowest Score Wins
Golf Digest "Best Young Teachers in America" 2016-17 & "Best in State" 2017-20 • WNY Section PGA Teacher of the Year 2019 :edel: :true_linkswear:

Check Out: New Topics | TST Blog | Golf Terms | Instructional Content | Analyzr | LSW | Instructional Droplets

Awards, Achievements, and Accolades

(edited)
6 hours ago, Pretzel said:

Depending on what is underneath the synthetic surfaces I've found that they can sometimes be "bouncy", in that a golf ball will behave as though the green was ultra firm (because it is if they compact the sand too tightly underneath it or if it's installed with minimal padding over concrete). Biggest factor I'd be concerned about would be the quality and durability of the hitting surface.

The top setup looks like a broken window waiting to happen if someone tried to flop it and bladed it instead.

I layed in artificial turf in the back yard. 15 x 45. The hardest and most labor intensive was prepping. I had to dig out all the existing bermuda, till and roll several times. It is recommended that you have a base of DG about 4 inches and compacted with power compactor. (I didn't). It looks fine, and you could hit off it, but it is really too hard as mentioned above. As far as complete weed abatement, and if you could wait about 60-90 days in hot weather, use a solarization technique where you stretch clear vinyl over the area. This will kill all vegetation including roots, but you need to do it in summer months. or you might consider laying in rolls of sod.  There are some more photos/mods under thread Dec 2015 "Improved Practice Area"

 

lawn pep#5.jpg

lawn prep #3.htm

lawn prep#1.jpg

lawn prep#2.htm

lawn prep#4.jpg

Edited by Hacker James
  • Upvote 1

"James"

:titleist: 913 D3 with Aldila RIP Phenom 60 4,2 Regular Shaft,  :touredge: Exotics XCG-7 Beta 3W with Matrix Red Tie Shaft:touredge: Exotics EX8 19 deg Hybrid w UST Mamiya Recoil F3 Shaft:touredge: Exotics EX9 28 deg Hybrid w UST Mamiya Recoil F3  shaft, / Bobby Jones Black 22 deg Hybrid:touredge: Exotics EXi 6 -PW  w UST Mamiya Recoil F2 Shaft, SW (56),GW (52),LW (60):touredge:  TGS),/ ODDYSEE Metal-X #7 customized putter (400G, cut down Mid Belly)

Awards, Achievements, and Accolades

On July 22, 2016 at 7:21 PM, WUTiger said:

Here's a short-game area I prepped for partial wedges and chips:

YardRangeTST.jpg

 

Lol. Love the tee box markers and that you have the option of playing from the "tips"!

Yours in earnest, Jason.
Call me Ernest, or EJ or Ernie.

PSA - "If you find yourself in a hole, STOP DIGGING!"

My Whackin' Sticks: :cleveland: 330cc 2003 Launcher 10.5*  :tmade: RBZ HL 3w  :nickent: 3DX DC 3H, 3DX RC 4H  :callaway: X-22 5-AW  :nike:SV tour 56* SW :mizuno: MP-T11 60* LW :bridgestone: customized TD-03 putter :tmade:Penta TP3   :aimpoint:

Awards, Achievements, and Accolades

  • Moderator
2 hours ago, Ernest Jones said:

Lol. Love the tee box markers and that you have the option of playing from the "tips"!

ahahahahaha

Driver: :callaway: Rogue ST  /  Woods: :tmade: Stealth 5W / Hybrid: :tmade: Stealth 25* / Irons: :ping: i500’s /  Wedges: :edel: 54*, 58*; Putter: :scotty_cameron: Futura 5  Ball: image.png Vero X1

 

 -Jonny

Awards, Achievements, and Accolades

(edited)
32 minutes ago, woodzie264 said:

ahahahahaha

yah, on my rinky dink practice station, I had to illegally straddle the line to set up between my Christmas tree ornament markers owing to the width of the mat.  It was an optical delusion. 

Edited by Hacker James

"James"

:titleist: 913 D3 with Aldila RIP Phenom 60 4,2 Regular Shaft,  :touredge: Exotics XCG-7 Beta 3W with Matrix Red Tie Shaft:touredge: Exotics EX8 19 deg Hybrid w UST Mamiya Recoil F3 Shaft:touredge: Exotics EX9 28 deg Hybrid w UST Mamiya Recoil F3  shaft, / Bobby Jones Black 22 deg Hybrid:touredge: Exotics EXi 6 -PW  w UST Mamiya Recoil F2 Shaft, SW (56),GW (52),LW (60):touredge:  TGS),/ ODDYSEE Metal-X #7 customized putter (400G, cut down Mid Belly)

Awards, Achievements, and Accolades

Note: This thread is 2935 days old. We appreciate that you found this thread instead of starting a new one, but if you plan to post here please make sure it's still relevant. If not, please start a new topic. Thank you!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Want to join this community?

    We'd love to have you!

    Sign Up
  • TST Partners

    PlayBetter
    TourStriker PlaneMate
    Golfer's Journal
    ShotScope
    The Stack System
    FitForGolf
    FlightScope Mevo
    Direct: Mevo, Mevo+, and Pro Package.

    Coupon Codes (save 10-20%): "IACAS" for Mevo/Stack/FitForGolf, "IACASPLUS" for Mevo+/Pro Package, and "THESANDTRAP" for ShotScope. 15% off TourStriker (no code).
  • Posts

    • Yes, this is the 2024 model. DSG ruined what Callaway perfected for most golfers. A darn good 3 piece golf ball. Now it's a 2 piece cheap ball. To me a 2 piece ball is fine and a 3 piece budget ball is better. I prefer a slightly harder ball, something in the 65-75 compression range that will perform similar to the old Gamer. The Titleist tru-feel is pretty good. I planned on giving Maxfli straightfli a try.
    • Is that the current generation Gamer? Another old standby for a firm and inexpensive ball is Pinnacle.  There are two models, the Rush and the Soft, but I don’t know what compression they are.
    • Good advice, but according to DSG website it is a 45 compression ball. My current ball is the Top-flite Gamer at 70. 45 is too low for me to go.
    • The 3 piece Maxfli Trifli is 2 dozen for $35.  The Trifli does not feel as soft as the Maxfli Softfli, which is why I like it. Other options would be one of the Srixons, which have a buy 2 get 1 free offer.
    • I have been carrying a 7 wood more often this year.  It’s especially handy if you have a downhill lie to an uphill green.  It’s also handy if the rough on the course is deep.
×
×
  • Create New...

Important Information

Welcome to TST! Signing up is free, and you'll see fewer ads and can talk with fellow golf enthusiasts! By using TST, you agree to our Terms of Use, our Privacy Policy, and our Guidelines.

The popup will be closed in 10 seconds...