Jump to content
Note: This thread is 2549 days old. We appreciate that you found this thread instead of starting a new one, but if you plan to post here please make sure it's still relevant. If not, please start a new topic. Thank you!

Recommended Posts

19 minutes ago, Kalnoky said:

By rotated in and out, do you mean we can move guys from the bench to a starting role after any round?

Correct, but you are limited to only so many starts per player in the season. It's 10 if I recall. Each time you put them in, you use up a start.

  • Upvote 1

- Shane

Awards, Achievements, and Accolades

18 minutes ago, Kalnoky said:

By rotated in and out, do you mean we can move guys from the bench to a starting role after any round?

@Kalnoky you can sub in from your bench, but if you do, you burn one of your starts for that player. Happens sometime when you might put a guy in just for the last round to try and get some of the bonus points of a Top 3 finish.

Once you have had a start for a tournament though, a maximum one start is burned. For example, if you had a player in round one, subbed him out, then put him back in round 4, it would only burn one start for that player. 

  • Upvote 1

Ping G 410 10.5 ˚ Driver Ping Tour Stiff Shaft
Ping G 410 14.5˚ 3 Ping Tour Stiff Shaft
Ping G 410 19˚ Ping Tour Stiff Shaft
i 500 irons 4-UW 1/2 inch over, blue dot, NS Pro Modus 105 Stiff Shafts
Ping Stealth Wedges Wedges  54˚ 58˚

Scotty Cameron Studio Select Newport 2 34" 


I don't really understand how the points work, but hey, **** it! Choose some golfers and roll the dice!

Yours in earnest, Jason.
Call me Ernest, or EJ or Ernie.

PSA - "If you find yourself in a hole, STOP DIGGING!"

My Whackin' Sticks: :cleveland: 330cc 2003 Launcher 10.5*  :tmade: RBZ HL 3w  :nickent: 3DX DC 3H, 3DX RC 4H  :callaway: X-22 5-AW  :nike:SV tour 56* SW :mizuno: MP-T11 60* LW :bridgestone: customized TD-03 putter :tmade:Penta TP3   :aimpoint:

Awards, Achievements, and Accolades

1 minute ago, Ernest Jones said:

I don't really understand how the points work, but hey, **** it! Choose some golfers and roll the dice!

That's pretty much how I went about it my first year. The only time I would switch out a player during a round is if they missed the cut.

...and sometimes I forgot to do that.

- Shane

Awards, Achievements, and Accolades

2 minutes ago, Ernest Jones said:

I don't really understand how the points work, but hey, **** it! Choose some golfers and roll the dice!

If a player is low man for the round, he receives 20 points.....if a guy is a shot back, they would get 2 points less, so 18, 2 shots back, 16 points and so on. That's why if a guy goes super low, some of the points for everyone else are minimal. 

The tournament winner gets an additional 20 bonus points, 2nd place, 10 points, and 3rd 5 points. 

Ping G 410 10.5 ˚ Driver Ping Tour Stiff Shaft
Ping G 410 14.5˚ 3 Ping Tour Stiff Shaft
Ping G 410 19˚ Ping Tour Stiff Shaft
i 500 irons 4-UW 1/2 inch over, blue dot, NS Pro Modus 105 Stiff Shafts
Ping Stealth Wedges Wedges  54˚ 58˚

Scotty Cameron Studio Select Newport 2 34" 


@gogolfing, @CarlSpackler  Thanks fellas, that makes perfect sense now re: bench vs. starters

Awards, Achievements, and Accolades

Just now, gogolfing said:

If a player is low man for the round, he receives 20 points.....if a guy is a shot back, they would get 2 points less, so 18, 2 shots back, 16 points and so on. That's why if a guy goes super low, some of the points for everyone else are minimal. 

The tournament winner gets an additional 20 bonus points, 2nd place, 10 points, and 3rd 5 points. 

So a wire-to-wire win would be 100 points? 20 for each lowest round and 20 for the win?

 

Yours in earnest, Jason.
Call me Ernest, or EJ or Ernie.

PSA - "If you find yourself in a hole, STOP DIGGING!"

My Whackin' Sticks: :cleveland: 330cc 2003 Launcher 10.5*  :tmade: RBZ HL 3w  :nickent: 3DX DC 3H, 3DX RC 4H  :callaway: X-22 5-AW  :nike:SV tour 56* SW :mizuno: MP-T11 60* LW :bridgestone: customized TD-03 putter :tmade:Penta TP3   :aimpoint:

Awards, Achievements, and Accolades

1 minute ago, Ernest Jones said:

So a wire-to-wire win would be 100 points? 20 for each lowest round and 20 for the win?

 

Only 100 points if they were low man each round.

Points not based on standing for each round, but score for each round.

So a guy could go wire to wire, but not be 100 points. For example, if he shot -8 in round one, and was low man, 20 points for the round. Then in round two, shot -4, but someone else shot -6, he would get 16 points, but would likely still be first in the tournament....an so on. 

That help or confuse things more?

  • Upvote 1

Ping G 410 10.5 ˚ Driver Ping Tour Stiff Shaft
Ping G 410 14.5˚ 3 Ping Tour Stiff Shaft
Ping G 410 19˚ Ping Tour Stiff Shaft
i 500 irons 4-UW 1/2 inch over, blue dot, NS Pro Modus 105 Stiff Shafts
Ping Stealth Wedges Wedges  54˚ 58˚

Scotty Cameron Studio Select Newport 2 34" 


  • Moderator
4 minutes ago, Ernest Jones said:

So a wire-to-wire win would be 100 points? 20 for each lowest round and 20 for the win?

A guy might go really low on the first day and lead at the end of every day, without actually being the low score each day.  However, you're right, the max score for a single player is 100 points.  And @gogolfing beat me with a more complete explanation.

  • Upvote 1

Dave

:callaway: Rogue SubZero Driver

:titleist: 915F 15 Fairway, 816 H1 19 Hybrid, AP2 4 iron to PW, Vokey 52, 56, and 60 wedges, ProV1 balls 
:ping: G5i putter, B60 version
 :ping:Hoofer Bag, complete with Newport Cup logo
:footjoy::true_linkswear:, and Ashworth shoes

the only thing wrong with this car is the nut behind the wheel.

Awards, Achievements, and Accolades

1 minute ago, gogolfing said:

Only 100 points if they were low man each round.

Points not based on standing for each round, but score for each round.

So a guy could go wire to wire, but not be 100 points. For example, if he shot -8 in round one, and was low man, 20 points for the round. Then in round two, shot -4, but someone else shot -6, he would get 16 points, but would likely still be first in the tournament....an so on. 

That help or confuse things more?

Sorry, I miss-used the term wire to wire. I meant lowest round all four days. 

I get it, thanks.

Yours in earnest, Jason.
Call me Ernest, or EJ or Ernie.

PSA - "If you find yourself in a hole, STOP DIGGING!"

My Whackin' Sticks: :cleveland: 330cc 2003 Launcher 10.5*  :tmade: RBZ HL 3w  :nickent: 3DX DC 3H, 3DX RC 4H  :callaway: X-22 5-AW  :nike:SV tour 56* SW :mizuno: MP-T11 60* LW :bridgestone: customized TD-03 putter :tmade:Penta TP3   :aimpoint:

Awards, Achievements, and Accolades

Ping G 410 10.5 ˚ Driver Ping Tour Stiff Shaft
Ping G 410 14.5˚ 3 Ping Tour Stiff Shaft
Ping G 410 19˚ Ping Tour Stiff Shaft
i 500 irons 4-UW 1/2 inch over, blue dot, NS Pro Modus 105 Stiff Shafts
Ping Stealth Wedges Wedges  54˚ 58˚

Scotty Cameron Studio Select Newport 2 34" 


1 minute ago, gogolfing said:

Ah. The secret is out. My guys were about to release that on Wikileaks. 

- Shane

Awards, Achievements, and Accolades

Just now, CarlSpackler said:

Ah. The secret is out. My guys were about to release that on Wikileaks. 

Just a tease @CarlSpackler for all of my secrets, your boys will need to water board, as it is all upstairs. 

For new guys, there are other things to consider with a tournament like this week where there is no cut. Sometimes I take a chance on a guy because I know they will be there all 4 rounds, in an attempt to manage my 10 starts for a top player. As well, over the first few weeks, see who is ranked in the A, B and C groups, as it will help with strategy around managing starts. Last year, the A group was lite many weeks, and I burned Patrick Read starts quite quickly as he played a lot early, and then I could use other guys whose schedules were heavier through spring and summer. 

That is one things that going through a season or two help with as you see trends etc with guys and tournaments that help out. I can't seem to remember what I had for dinner yesterday, but for some reason can remember guys who play well at certain events. Quite honestly, I usually set my lineup then have a look at the Expert Picks, which often bites me in the ass as I would usually be better off going with my initial picks. 

  • Upvote 1

Ping G 410 10.5 ˚ Driver Ping Tour Stiff Shaft
Ping G 410 14.5˚ 3 Ping Tour Stiff Shaft
Ping G 410 19˚ Ping Tour Stiff Shaft
i 500 irons 4-UW 1/2 inch over, blue dot, NS Pro Modus 105 Stiff Shafts
Ping Stealth Wedges Wedges  54˚ 58˚

Scotty Cameron Studio Select Newport 2 34" 


Starters and the bench has been picked, ready to go.

Nice that they start the year with a no-cut event, preventing me from being peeved off when I can't field a full roster for the weekend.

Players play, tough players win!

Awards, Achievements, and Accolades

How the flip is Jordan a B player but Vaughn Taylor is an A??  Am I missing something?

In my Bag: Driver: Titelist 913 D3 9.5 deg. 3W: TaylorMade RBZ 14.5 3H: TaylorMade RBZ 18.5 4I - SW: TaylorMade R7 TP LW: Titelist Vokey 60 Putter: Odyssey 2-Ball

Awards, Achievements, and Accolades

1 minute ago, Gunther said:

How the flip is Jordan a B player but Vaughn Taylor is an A??  Am I missing something?

Players stay in the same category all year, and they are not based on World Ranking. As you go through the 3 groups, you'll see some go to guys in each category. Yahoo has always done their groups this way, and it seems to help with roster management in terms of the maximum starts.

  • Upvote 1

Ping G 410 10.5 ˚ Driver Ping Tour Stiff Shaft
Ping G 410 14.5˚ 3 Ping Tour Stiff Shaft
Ping G 410 19˚ Ping Tour Stiff Shaft
i 500 irons 4-UW 1/2 inch over, blue dot, NS Pro Modus 105 Stiff Shafts
Ping Stealth Wedges Wedges  54˚ 58˚

Scotty Cameron Studio Select Newport 2 34" 


I'm in!!  Haven't done this type of format before so I'll be interested to see how it plays out.

Driver: Cobra FlyZ | 9.5 Degrees Draw | Fujikura Pro 63 Tour Spec
Fairway Wood: Cobra F7 3-4 Wood | 14.5 degrees | Fujikura Pro 65
Hybrid: Cobra F7 3-4H | 19 degrees | Fujikura Pro 75H
Irons: Srixon Z545 (4-Iron) | Srixon Z 765 (5-PW)
Wedges: Titleist Vokey SM6 | 50 F Grind | 54 M Grind | 58 K Grind
Putter: Odyssey O-Works 1W WBW


  • Moderator
16 hours ago, gogolfing said:

Good to know @CarlSpackler , we should also see if we can get Putin and Trump to get in on the action:beer: perhaps he can make our League great again. 

Please remember The Sand Trap policy on politics and religious posting.

Scott

Titleist, Edel, Scotty Cameron Putter, Snell - AimPoint - Evolvr - MirrorVision

My Swing Thread

boogielicious - Adjective describing the perfect surf wave

Awards, Achievements, and Accolades

Note: This thread is 2549 days old. We appreciate that you found this thread instead of starting a new one, but if you plan to post here please make sure it's still relevant. If not, please start a new topic. Thank you!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Want to join this community?

    We'd love to have you!

    Sign Up
  • TST Partners

    PlayBetter
    TourStriker PlaneMate
    Golfer's Journal
    ShotScope
    The Stack System
    FitForGolf
    FlightScope Mevo
    Direct: Mevo, Mevo+, and Pro Package.

    Coupon Codes (save 10-20%): "IACAS" for Mevo/Stack/FitForGolf, "IACASPLUS" for Mevo+/Pro Package, and "THESANDTRAP" for ShotScope. 15% off TourStriker (no code).
  • Popular Now

  • Posts

    • What technology? There’s not much. Or a spreadsheet. 🤣😜
    • I was thinking about what you suggested on this. And it's very possible its true.  I was also thinking, why wouldn't they have a piece of software that tells them something like: "If you drill the shaft hole at x angle and the shaft is y long, but the weights in A, B and C locations at D, E and F amounts? I mean we aren't modelling anything here that isn't a known relationship?  I've been in the manufacturing world a long time (33 years.) I've worked for and seen tons of manufacturers in the US who can handle one-piece flow with no hiccups what so ever.  I would love to take a plant tour and offer my services to these guys. On a whim, I looked on their webpage and they do have two positions available. A fulfillment associate and a fitting representative. Both at positions are at their plant in OR. Neither of these was a lean manufacturing engineer so I moved on.  I apologize for beating this dead horse.  I'm not sure why the cost adder for custom built from standard parts bothers me so much. It could be because I've worked so many places that just have you build up a nomenclature which relates to a build sheet and end of line test. Which equals no cost adder for standard parts. Maybe it's because I once toured the Roles Royce plant in England and thought "I'd never feakin buy one of these cars." Maybe I've been spoiled by PXG and Mizuno, the last two places I've order custom fit irons from. They customized each club including lie angle tweaks, loft tweaks, length tweaks, weight port tweaks, etc... No cost adder. 
    • Ugh, I think I'm a little out of practice. Wordle 1,278 5/6* ⬛🟨🟨⬛🟨 🟨🟨🟨⬛🟩 ⬛🟩🟨🟨🟩 🟩🟩⬛🟩🟩 🟩🟩🟩🟩🟩
    • Wordle 1,278 4/6 ⬜⬜⬜⬜🟨 ⬜⬜⬜⬜🟨 ⬜🟩⬜🟩🟩 🟩🟩🟩🟩🟩
    • Wordle 1,278 3/6* ⬛⬛⬛⬛🟨 ⬛⬛🟨🟨⬛ 🟩🟩🟩🟩🟩
×
×
  • Create New...

Important Information

Welcome to TST! Signing up is free, and you'll see fewer ads and can talk with fellow golf enthusiasts! By using TST, you agree to our Terms of Use, our Privacy Policy, and our Guidelines.

The popup will be closed in 10 seconds...