Jump to content
Check out the Spin Axis Podcast! ×
Note: This thread is 1086 days old. We appreciate that you found this thread instead of starting a new one, but if you plan to post here please make sure it's still relevant. If not, please start a new topic. Thank you!

Recommended Posts

Posted
8 minutes ago, pganapathy said:

You would hope so, but I don't see it.  Either you get something printed to help identify a ball or you put it on via a sharpie/paint/nail polish/permanent marker or some similar means of identification.  Sharpies are the most practical of these options

I guess we'll find out. Will be able to do a head-to-head whenever these Marki ones arrive. Also saw some comments elsewhere from ex-sharpie users recommending the Sakura Identi-Pen. Thinking I might throw those in the mix, along with a paint pen, and see if any stand out. 

If I can find one that just doesn't smudge, I'll be happy. 

TaylorMade Sim Max 9° - Fujikura Ventus Blue / Rombax
Callaway X-Hot Pro 15° - Project X 6.0
Snake Eyes 600B 3-PW - Dynamic Gold s300
Snake Eyes 685BX Fluid Forged 52°, 56°, 60° - Dynamic Gold s300
Snake Eyes MSC1 / Golfsmith NCC - 1701
Maxfli Tour X

Awards, Achievements, and Accolades

Posted
3 hours ago, DoubleAce said:

I guess we'll find out. Will be able to do a head-to-head whenever these Marki ones arrive. Also saw some comments elsewhere from ex-sharpie users recommending the Sakura Identi-Pen. Thinking I might throw those in the mix, along with a paint pen, and see if any stand out. 

If I can find one that just doesn't smudge, I'll be happy. 

Aren't we essentially talking about some form of sharpie/temporary marker/permanent marker for all of these.

What's in the bag

  • Taylor Made r5 dual Draw 9.5* (stiff)
  • Cobra Baffler 4H (stiff)
  • Taylor Made RAC OS 6-9,P,S (regular)
  • Golden Bear LD5.0 60* (regular)
  • Aidia Z-009 Putter
  • Inesis Tour 900 golf ball
Awards, Achievements, and Accolades

  • Administrator
Posted
2 hours ago, pganapathy said:

Aren't we essentially talking about some form of sharpie/temporary marker/permanent marker for all of these.

Yes.

  • Thumbs Up 1

Erik J. Barzeski —  I knock a ball. It goes in a gopher hole. 🏌🏼‍♂️
Director of Instruction Golf Evolution • Owner, The Sand Trap .com • AuthorLowest Score Wins
Golf Digest "Best Young Teachers in America" 2016-17 & "Best in State" 2017-20 • WNY Section PGA Teacher of the Year 2019 :edel: :true_linkswear:

Check Out: New Topics | TST Blog | Golf Terms | Instructional Content | Analyzr | LSW | Instructional Droplets

Awards, Achievements, and Accolades

Posted
7 hours ago, DoubleAce said:

I guess we'll find out. Will be able to do a head-to-head whenever these Marki ones arrive. Also saw some comments elsewhere from ex-sharpie users recommending the Sakura Identi-Pen. Thinking I might throw those in the mix, along with a paint pen, and see if any stand out. 

If I can find one that just doesn't smudge, I'll be happy. 

Just a thought. Maybe the super fine point sharpie would work better for what you want to do.

images.jpg.be5c73fff215e059a4a77e6999f41eca.jpg

Have you tried those?

My bag is an ever-changing combination of clubs. 

A mix I am forever tinkering with. 

Awards, Achievements, and Accolades

Posted
5 hours ago, pganapathy said:

Aren't we essentially talking about some form of sharpie/temporary marker/permanent marker for all of these.

Yes, but doesn't mean they're all created equal. 

1 hour ago, ChetlovesMer said:

Just a thought. Maybe the super fine point sharpie would work better for what you want to do.

images.jpg.be5c73fff215e059a4a77e6999f41eca.jpg

Have you tried those?

I did use an ultra fine for most of it. But one solution, absent any of these other markers performing better, would be to do just an outline style logo. Instead of one with infill. Reducing the amount of ink coverage would help mitigate the smudging. Or at least the appearance of it.

TaylorMade Sim Max 9° - Fujikura Ventus Blue / Rombax
Callaway X-Hot Pro 15° - Project X 6.0
Snake Eyes 600B 3-PW - Dynamic Gold s300
Snake Eyes 685BX Fluid Forged 52°, 56°, 60° - Dynamic Gold s300
Snake Eyes MSC1 / Golfsmith NCC - 1701
Maxfli Tour X

Awards, Achievements, and Accolades

Posted

Sharpies are just a temporary solution.   Here are three of my balls, #1 has not been used, #2 was used one round and the right one was used two rounds.   In all fairness, the third ball was used in a muddy LCP round.

 

 

0428221155_2.jpg

  • Thumbs Up 1

From the land of perpetual cloudiness.   I'm Denny

Awards, Achievements, and Accolades

Posted

Let me get this straight, marking your ball is for identification purposes only...correct? I put a dot and my initials on my golf ball with a sharpie. I've done that same mark for a number of years now. 

I play a new ball for one competitive round, then I throw it in the bag as a practice ball/ provisional etc.They stay in the bag for  1 or 2 practice rounds then they get demoted to the shag bag. While in the shag bag I chip and putt with those balls for years before I throw them away as they begin to yellow and I replace them with "newer" old balls.

What I am getting at is this...all those balls I throw away after:

one 18 hole competitive round

and, one or two practice rounds

and, several years of short game practice

I can STILL identify as mine because I can still see that original mark from years before. So I must ask.. what in the heck are you doing to your golf ball that you need more  permanent ink than that?

  • Upvote 1

Danny    In my :ping: Hoofer Tour golf bag on my :clicgear: 8.0 Cart

Driver:   :pxg: 0311 Gen 5  X-Stiff.                        Irons:  :callaway: 4-PW APEX TCB Irons 
3 Wood: :callaway: Mavrik SZ Rogue X-Stiff                            Nippon Pro Modus 130 X-Stiff
3 Hybrid: :callaway: Mavrik Pro KBS Tour Proto X   Wedges: :vokey:  50°, 54°, 60° 
Putter: :odyssey:  2-Ball Ten Arm Lock        Ball: :titleist: ProV 1

 

 

 

 

Awards, Achievements, and Accolades

  • Moderator
Posted
19 minutes ago, dennyjones said:

Sharpies are just a temporary solution.   Here are three of my balls, #1 has not been used, #2 was used one round and the right one was used two rounds.   In all fairness, the third ball was used in a muddy LCP round.

 

 

0428221155_2.jpg

Sharpie stays on my clubface from being transferred from impact longer than it stays on the ball.

This is a good display of the wear on the ink over time. I could demonstrate something similar, but if I play a round with a single ball, I donate it to the Smithsonian. 

  • Thumbs Up 1
  • Funny 1

Bill

“By three methods we may learn wisdom: First, by reflection, which is noblest; Second, by imitation, which is easiest; and third by experience, which is the bitterest.” - Confucius

My Swing Thread

Awards, Achievements, and Accolades

Posted
14 hours ago, billchao said:

Spray paint.

I was thinking the same thing but the heat resistant type for engines (ie: Harley) or grills. I used some touch up on my bike and that stuff takes a beating.  

Callaway AI Smoke TD Max 10.5* | Cobra Big Tour 15.5* | Rad Tour 18.5* | Titleist U500 4i | T100 5-P | Vokey 50/8* F, 54/10* S,  58/10* S | Scotty Cameron Squareback 1


  • Moderator
Posted
37 minutes ago, billchao said:

Sharpie stays on my clubface from being transferred from impact longer than it stays on the ball.

It might get worn off sooner if your impact point was in the same general area of the clubface each time.

Dave

:callaway: Rogue SubZero Driver

:titleist: 915F 15 Fairway, 816 H1 19 Hybrid, AP2 4 iron to PW, Vokey 52, 56, and 60 wedges, ProV1 balls 
:ping: G5i putter, B60 version
 :ping:Hoofer Bag, complete with Newport Cup logo
:footjoy::true_linkswear:, and Ashworth shoes

the only thing wrong with this car is the nut behind the wheel.

Awards, Achievements, and Accolades

  • Moderator
Posted
1 hour ago, NM Golf said:

Let me get this straight, marking your ball is for identification purposes only...correct? I put a dot and my initials on my golf ball with a sharpie. I've done that same mark for a number of years now. 

I play a new ball for one competitive round, then I throw it in the bag as a practice ball/ provisional etc.They stay in the bag for  1 or 2 practice rounds then they get demoted to the shag bag. While in the shag bag I chip and putt with those balls for years before I throw them away as they begin to yellow and I replace them with "newer" old balls.

What I am getting at is this...all those balls I throw away after:

one 18 hole competitive round

and, one or two practice rounds

and, several years of short game practice

I can STILL identify as mine because I can still see that original mark from years before. So I must ask.. what in the heck are you doing to your golf ball that you need more  permanent ink than that?

fred armisen promotion GIF by IFC
 

  • Funny 2

Scott

Titleist, Edel, Scotty Cameron Putter, Snell - AimPoint - Evolvr - MirrorVision

My Swing Thread

boogielicious - Adjective describing the perfect surf wave

Awards, Achievements, and Accolades

  • Moderator
Posted
1 hour ago, DaveP043 said:

It might get worn off sooner if your impact point was in the same general area of the clubface each time.

I’m just happy when I hit the ball on the clubface.

Bill

“By three methods we may learn wisdom: First, by reflection, which is noblest; Second, by imitation, which is easiest; and third by experience, which is the bitterest.” - Confucius

My Swing Thread

Awards, Achievements, and Accolades

Posted
2 hours ago, DaveP043 said:

It might get worn off sooner if your impact point was in the same general area of the clubface each time.

Lol. 

:ping: G25 Driver Stiff :ping: G20 3W, 5W :ping: S55 4-W (aerotech steel fiber 110g shafts) :ping: Tour Wedges 50*, 54*, 58* :nike: Method Putter Floating clubs: :edel: 54* trapper wedge

Awards, Achievements, and Accolades

Posted
3 hours ago, NM Golf said:

Let me get this straight, marking your ball is for identification purposes only...correct? I put a dot and my initials on my golf ball with a sharpie. I've done that same mark for a number of years now. 

I play a new ball for one competitive round, then I throw it in the bag as a practice ball/ provisional etc.They stay in the bag for  1 or 2 practice rounds then they get demoted to the shag bag. While in the shag bag I chip and putt with those balls for years before I throw them away as they begin to yellow and I replace them with "newer" old balls.

What I am getting at is this...all those balls I throw away after:

one 18 hole competitive round

and, one or two practice rounds

and, several years of short game practice

I can STILL identify as mine because I can still see that original mark from years before. So I must ask.. what in the heck are you doing to your golf ball that you need more  permanent ink than that?

The above provided no value in the context of the OP. And I'd imagine my response to your question would do nothing to advance the same either. So, I'll pass on going down that road.

2 hours ago, TourSpoon said:

I was thinking the same thing but the heat resistant type for engines (ie: Harley) or grills. I used some touch up on my bike and that stuff takes a beating.  

The whole thing basically comes down to what's going to have the best bond and/or abrasion resistance. So this may be the best solution. Downside is it'll require a bit more effort compared to a marker. But I'd be OK with that if the durability and smear resistance were markedly improved.

TaylorMade Sim Max 9° - Fujikura Ventus Blue / Rombax
Callaway X-Hot Pro 15° - Project X 6.0
Snake Eyes 600B 3-PW - Dynamic Gold s300
Snake Eyes 685BX Fluid Forged 52°, 56°, 60° - Dynamic Gold s300
Snake Eyes MSC1 / Golfsmith NCC - 1701
Maxfli Tour X

Awards, Achievements, and Accolades

  • Moderator
Posted
1 hour ago, DoubleAce said:

The whole thing basically comes down to what's going to have the best bond and/or abrasion resistance. So this may be the best solution. Downside is it'll require a bit more effort compared to a marker. But I'd be OK with that if the durability and smear resistance were markedly improved.

If you go the spray paint route you should make a bunch of stencils so you can do a batch at a time instead of individually.

Or even a single stencil that holds multiple balls.

Bill

“By three methods we may learn wisdom: First, by reflection, which is noblest; Second, by imitation, which is easiest; and third by experience, which is the bitterest.” - Confucius

My Swing Thread

Awards, Achievements, and Accolades

Posted
9 minutes ago, billchao said:

If you go the spray paint route you should make a bunch of stencils so you can do a batch at a time instead of individually.

Or even a single stencil that holds multiple balls.

That'd definitely expedite things. They cost me all of 3 cents to print. So I could print a bunch and do a dozen balls or so at a time. To that end, it may end up being easier/faster than a marker. 

TaylorMade Sim Max 9° - Fujikura Ventus Blue / Rombax
Callaway X-Hot Pro 15° - Project X 6.0
Snake Eyes 600B 3-PW - Dynamic Gold s300
Snake Eyes 685BX Fluid Forged 52°, 56°, 60° - Dynamic Gold s300
Snake Eyes MSC1 / Golfsmith NCC - 1701
Maxfli Tour X

Awards, Achievements, and Accolades

Posted

I’m pretty surprised there’s this much chatter over ball marking. I’ve never had any issues with Sharpies and when they do mark my clubs I’ve had no problem wiping it right off the hosels. 

  • Funny 5

:ping: G25 Driver Stiff :ping: G20 3W, 5W :ping: S55 4-W (aerotech steel fiber 110g shafts) :ping: Tour Wedges 50*, 54*, 58* :nike: Method Putter Floating clubs: :edel: 54* trapper wedge

Awards, Achievements, and Accolades

Posted
1 hour ago, Vinsk said:

I’m pretty surprised there’s this much chatter over ball marking. I’ve never had any issues with Sharpies and when they do mark my clubs I’ve had no problem wiping it right off the hosels. 

Lol, no kidding. Had no idea a simple question would be so contentious. 

And I don't mind sharpie transferring to the club. The crazy smears I've been getting with the larger logo/design just make the golf ball look like trash.

TaylorMade Sim Max 9° - Fujikura Ventus Blue / Rombax
Callaway X-Hot Pro 15° - Project X 6.0
Snake Eyes 600B 3-PW - Dynamic Gold s300
Snake Eyes 685BX Fluid Forged 52°, 56°, 60° - Dynamic Gold s300
Snake Eyes MSC1 / Golfsmith NCC - 1701
Maxfli Tour X

Awards, Achievements, and Accolades

Note: This thread is 1086 days old. We appreciate that you found this thread instead of starting a new one, but if you plan to post here please make sure it's still relevant. If not, please start a new topic. Thank you!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Want to join this community?

    We'd love to have you!

    Sign Up
  • TST Partners

    PlayBetter
    Golfer's Journal
    ShotScope
    The Stack System
    FitForGolf
    FlightScope Mevo
    Direct: Mevo, Mevo+, and Pro Package.

    Coupon Codes (save 10-20%): "IACAS" for Mevo/Stack/FitForGolf, "IACASPLUS" for Mevo+/Pro Package, and "THESANDTRAP" for ShotScope. 15% off TourStriker (no code).
  • Posts

    • Day 1: 2025.12.26 Worked on LH position on grip, trying to keep fingers closer to perpendicular to the club. Feels awkward but change is meant to.
    • Please see this topic for updated information:
    • Please see this topic for updated information:
    • When you've been teaching golf as long as I have, you're going to find that you can teach some things better than you previously had, and you're probably going to find some things that you taught incorrectly. I don't see that as a bad thing — what would be worse is refusing to adapt and grow given new information. I've always said that my goal with my instruction isn't to be right, but it's to get things right. To that end, I'm about five years late in issuing a public proclamation on something… When I first got my GEARS system, I immediately looked at the golf swings of the dozens and dozens of Tour players for which I suddenly had full 3D data. I created a huge spreadsheet showing how their bodies moved, how the club moved, at various points in the swing. I mapped knee and elbow angles, hand speeds, shoulder turns and pelvis turns… etc. I re-considered what I thought I knew about the golf swing as performed by the best players. One of those things dated back to the earliest days: that you extend (I never taught "straighten" and would avoid using that word unless in the context of saying "don't fully straighten") the trail knee/leg in the backswing. I was mislead by 2D photos from less-than-ideal camera angles — the trail leg rotates a bit during the backswing, and so when observing trail knee flex should also use a camera that moves to stay perpendicular to the plane of the ankle/knee/hip joint. We have at least two topics here on this (here and here; both of which I'll be updating after publishing this) where @mvmac and I advise golfers to extend the trail knee. Learning that this was not right is one of the reasons I'm glad to have a 3D system, as most golfers generally preserve the trail knee flex throughout the backswing. Data Here's a video showing an iron and a driver of someone who has won the career slam: Here's what the graph of his right knee flex looks like. The solid lines I've positioned at the top of the backswing (GEARS aligns both swings at impact, the dashed line). Address is to the right, of course, and the graph shows knee flex from the two swings above. The data (17.56° and 23.20°) shows where this player is in both swings (orange being the yellow iron swing, pink the blue driver swing). You can see that this golfer extends his trail knee 2-3°… before bending it even more than that through the late backswing and early downswing. Months ago I created a quick Instagram video showing the trail knee flex in the backswing of several players (see the top for the larger number): Erik J. Barzeski (@iacas) • Instagram reel GEARS shares expert advice on golf swing technique, focusing on the critical backswing phase. Tour winners and major champions reveal the key to a precise and powerful swing, highlighting the importance of... Here are a few more graphs. Two LIV players and major champions: Two PGA Tour winners: Two women's #1 ranked players: Two more PGA Tour winners (one a major champ): Two former #1s, the left one being a woman, the right a man, with a driver: Two more PGA Tour players: You'll notice a trend: they almost all maintain roughly the same flex throughout their backswing and downswing. The Issues with Extending the Trail Knee You can play good golf extending (again, not "straightening") the trail knee. Some Tour players do. But, as with many things, if 95 out of 100 Tour players do it, you're most likely better off doing similarly to what they do. So, what are the issues with extending the trail knee in the backswing? To list a few: Pelvic Depth and Rotation Quality Suffers When the trail knee extends, the trail leg often acts like an axle on the backswing, with the pelvis rotating around the leg and the trail hip joint. This prevents the trail side from gaining depth, as is needed to keep the pelvis center from thrusting toward the ball. Most of the "early extension" (thrust) that I see occurs during the backswing. Encourages Early Extension (Thrust) Patterns When you've thrust and turned around the trail hip joint in the backswing, you often thrust a bit more in the downswing as the direction your pelvis is oriented is forward and "out" (to the right for a righty). Your trail leg can abduct to push you forward, but "forward" when your pelvis is turned like that is in the "thrust" direction. Additionally, the trail knee "breaking" again at the start of the downswing often jumps the trail hip out toward the ball a bit too much or too quickly. While the trail hip does move in that direction, if it's too fast or too much, it can prevent the lead side hip from getting "back" at the right rate, or at a rate commensurate with the trail hip to keep the pelvis center from thrusting. Disrupts the Pressure Shift/Transition When the trail leg extends too much, it often can't "push" forward normally. The forward push begins much earlier than forward motion begins — pushing forward begins as early as about P1.5 to P2 in the swings of most good golfers. It can push forward by abducting, again, but that's a weaker movement that shoves the pelvis forward (toward the target) and turns it more than it generally should (see the next point). Limits Internal Rotation of the Trail Hip Internal rotation of the trail hip is a sort of "limiter" on the backswing. I have seen many golfers on GEARS whose trail knee extends, whose pelvis shifts forward (toward the target), and who turn over 50°, 60°, and rarely but not never, over 70° in the backswing. If you turn 60° in the backswing, it's going to be almost impossible to get "open enough" in the downswing to arrive at a good impact position. Swaying/Lateral Motion Occasionally a golfer who extends the trail knee too much will shift back too far, but more often the issue is that the golfer will shift forward too early in the backswing (sometimes even immediately to begin the backswing), leaving them "stuck forward" to begin the downswing. They'll push forward, stop, and have to restart around P4, disrupting the smooth sequence often seen in the game's best players. Other Bits… Reduces ground reaction force potential, compromises spine inclination and posture, makes transition sequencing harder, increases stress on the trail knee and lower back… In short… It's not athletic. We don't do many athletic things with "straight" or very extended legs (unless it's the end of the action, like a jump or a big push off like a step in a running motion).
    • Day 135 12-25 Wide backswing to wide downswing drill. Recorder and used mirror. 
×
×
  • Create New...

Important Information

Welcome to TST! Signing up is free, and you'll see fewer ads and can talk with fellow golf enthusiasts! By using TST, you agree to our Terms of Use, our Privacy Policy, and our Guidelines.